Building Energy-Efficient Material Testing Equipment
DRCD-3030A Dual-Plate Thermal Conductivity Meter (Cold Plate, Low Temperature: −10°C)
The thermal conductivity (or thermal resistance) is one of the primary thermal performance parameters of insulation materials and serves as the key technical indicator for evaluating their insulating properties.
DRCD-3030B Steady-State Thermal Conductivity Tester for Insulation Materials (Hot-Plate Method)
It is used to measure the thermal conductivity of various homogeneous plate‑shaped insulation materials, poorly conductive materials, and vacuum insulation panels. The instrument employs a microcomputer‑based automatic control system, offering advantages such as automated experimental process control, automatic data acquisition, and report generation, with a high degree of智能化 (intelligent automation).
DRCD-6060 Flat Plate Thermal Conductivity Meter (Hot Plate Method)
DRCD-6060 Flat‑Plate Thermal Conductivity Meter (Hot‑Plate Method) – Product Overview: The flat‑plate thermal conductivity meter (hot‑plate method) is a state-of-the-art testing instrument that employs the dual‑plate technique. Its measurement principle is based on establishing a one‑dimensional steady heat‑flow field within an infinitely large plate bounded by two parallel, uniformly heated plates. By measuring the heat power in the central calibration zone, it determines the thermal conductivity of various homogeneous, plate‑shaped insulation materials as well as other novel materials with poor thermal conductivity.
DR-SM Graphite Material Medium-Temperature Thermal Conductivity Tester
It even performs automated computer testing, processes the data, and prints out the test report.
LBT-DTR-01 Single-Item Combustion Test Chamber for Building Materials or Products
This test apparatus is a specialized instrument designed to evaluate the fire‑response behavior of building materials or products (excluding floor coverings) in a single‑burner test, thereby determining their intrinsic physical properties.
SYA-26 Touchscreen Computer Dual-Control Building Material Smoke Density Tester
It is applicable to the determination of the static smoke production rate during the combustion of building materials, their products, and other materials.
SYA-3 Adiabatic Material Hydrophobicity Tester
It is primarily used to test the hydrophobicity of thermal insulation materials and products, such as perlite, mineral wool, calcium silicate, and silicates.
SYA-12A High-Precision Adhesion Strength Tester for Thermal Insulation Materials
The high-precision tensile testing instrument features an S‑shaped, high‑accuracy load cell and an electromechanical integrated design. The entire system is a single unit, with the handle, S‑shaped sensor, lead screw, and reaction base forming a “door‑type” structure. Equipped with a digital display, it allows direct reading of tensile force (kN) and material strength (MPa), and offers automatic calculations, peak‑hold functionality, data storage, and query capabilities. It is ideally suited for both laboratory and field applications. The complete testing system boasts robust performance, lightweight construction, and ergonomic, effortless operation via the handle.
SYA-13 Fiber Image Diameter Analyzer
This system boasts high measurement accuracy, comprehensive functionality, rapid computational speed, user-friendly operation, complete and precise output, and reliable performance, making it widely applicable in the wool textile industry, fiber‑testing laboratories, commodity inspection agencies, and animal husbandry for measuring the diameter of animal fibers such as wool and rabbit hair, as well as for identifying various natural and synthetic blended fibers and different types of down.
SYA-14 Building Insulation Material Combustibility Performance Testing Apparatus (New Standard)
This test is applicable to the determination of the flammability of building materials, decorative and finishing materials, and related products used in industrial and civil construction. For materials and products used in other settings, this test may be referenced. Under conditions without external radiant heat, a small flame is applied directly to a vertically positioned specimen to assess the material’s flammability.
SYA-15A Rigid Foam Water Absorption Rate Slicer
The rigid foam specimen slicer is a component of the water absorption test for rigid cellular plastics.
SYA-16A Fully Automatic Oxygen Index Analyzer
It is used to determine the combustion performance of various textiles, including woven fabrics, knitted fabrics, and nonwoven fabrics, and can also be applied to assess the combustion characteristics of plastics, rubbers, papers, and other materials.
SYA-17A Dew Point Meter for Insulating Glass (Dry-Ice Type)
Insulating glass sealing performance testing equipment, insulating glass dew point meter (dry‑ice type)
SYA-17A Dual-Use Dew Point Meter for In-Service and Laboratory Applications in Insulated Glass Units
An automated testing device designed to determine whether condensation forms on the inner surface of insulated glass units under specified standard conditions and procedures. It can also assess the airtightness of insulated glass; under perfectly sealed conditions, no condensation should occur.
SYA-17 Dew Point Meter for Insulating Glass
The dew point meter for insulated glass is primarily used to determine the dew point of insulated glass (testing for condensation under low-temperature conditions).
SYA-18 Type On-Site Air Tightness Testing Equipment for Building Doors and Windows
The on-site airtightness testing instrument for building doors and windows is a specialized device designed to evaluate the air-tightness performance of these products. Typically comprising a differential pressure sensor, a control system, and a data acquisition system, the instrument features a compact, portable design that readily meets the demands of field testing.
This method is applicable for determining the main components of non‑homogeneous products and the non‑combustibility of homogeneous products using a heating furnace system under specified conditions. The product is intended for assessing the non‑combustibility of building materials, decorative and finishing materials, and related products used in industrial and civil construction; it may also be referenced for evaluating the non‑combustibility of materials and products employed in other settings.
SYA-24 Flexible Foam Rubber and Plastic Vacuum Water Absorption Tester
The flexible foam vacuum water absorption tester is used to determine the vacuum water absorption of flexible foams. It automatically applies a pressure of –85 kPa, maintains this pressure for 3 minutes, and then automatically releases it. The instrument features an integrated control system, offering simple operation and flexible, convenient use.
SYA-25 Building Material Combustion Calorimeter
Research institutes, universities, and other industry sectors measure the calorific value of combustible materials such as coal, coke, and petroleum.
SYA-27A Architectural Glass Hemispherical Emissivity Test System
It can measure optical and thermal parameters of architectural glass, such as the solar shading coefficient, and is capable of testing glass samples in commonly available sizes. It must be used in conjunction with a visible‑light transmittance meter for shading‑coefficient measurements.
Its stable and reliable quality, precise measurement capabilities, and user-friendly operation give it broad application prospects in the field of architectural glass inspection. The system supports multiple data output formats and incorporates robust quality-control features, enabling it to meet the diverse needs of various users.
SYL-28 Mineral Material Adhesion Brushing Machine
The instrument, under specified load and brushing cycles, compares the mass of mineral material brushed off with the original mass of mineral material in a test specimen cut from the same roll, thereby determining the mineral‑material adhesion of the waterproofing membrane.
Round plastic film moisture-permeable cup
The determination of water vapor transmission properties for materials such as paper, nonwoven fabrics, and synthetic leather may be conducted by reference to this standard.
Moisture Permeability Test Cup for Building Materials and Their Products
This instrument is used to determine the moisture permeability, water vapor transmission rate, and water vapor transmission coefficient of various plastic films and building materials. It is also suitable for measuring the water vapor transmission properties of other sheet‑ or plate‑like materials and synthetic leathers.
Wall Steady-State Heat Transfer Property Tester
The steady-state thermal conductivity tester for walls is a precision instrument specifically designed to measure the steady-state thermal properties of wall materials.
This instrument is primarily used to measure the thermal resistance of thin materials such as thermal conductors, thermally conductive silicone sheets, thermally conductive resins, plastics, rubbers, aluminum substrates, graphene, beryllium oxide ceramics, and alumina ceramics, as well as the contact thermal resistance at solid interfaces and the thermal conductivity of these materials.
SYA-32B Thermal Storage Coefficient Tester for Insulation Materials
Building and thermal insulation materials are increasingly being used in a wide range of engineering applications. These materials possess a set of thermophysical properties, which are often required in thermal calculations. To ensure the accuracy and reliability of such calculations, it is essential to select appropriate thermophysical parameters that reflect the materials’ actual service conditions; otherwise, no matter how precise the calculation formulas may be, the results will still differ significantly from the real-world performance.
SYA-32C Thermal Conductivity Tester for Fire-Resistant Insulation Materials
This instrument is suitable for measuring the thermal conductivity of refractory insulation materials, ceramic fibers, felts, textiles, boards, bricks, and other materials at various temperatures.
SYA-32D Thermal Conductivity Tester for Fire-Resistant Insulation Materials
This instrument is suitable for measuring the thermal conductivity of refractory insulation materials, ceramic fibers, felts, textiles, boards, bricks, and other materials at various temperatures. With an optional frame, it can also be used to measure powdered materials.
SYA-33 On-site Thermal Transmittance Tester for Building Envelopes
A heat flux sensor and temperature sensors are placed on the inner wall surface, while a temperature sensor is positioned on the outer wall surface. Relevant data are collected over the specified test duration. By processing and analyzing these data, the thermal transmittance of the wall and roof under test is determined. This instrument features wireless on-site connectivity for data acquisition and reception, as well as wireless remote transmission. With its simple structure, convenient installation, easy maintenance, and capability for remote monitoring and diagnostics, it is an ideal testing device for product quality inspection agencies at all levels.
Whether you want to customize product features
I still need some examples to refer to ——
Please let us know what you're looking for, and we'll send you relevant materials to help you move your project forward quickly!
Global Partners
Customer Satisfaction
Committed to becoming a leader in China's testing equipment manufacturing industry
Share To
Contact Us
Mobile:+86-15102211717
Whatsapp:+86-15102211717
E-mail:lbt@lbt.ltd
Address:Tianjin Jinghai Economic Development Zone