Textile and Apparel Testing Equipment
201SY-II Textile Formaldehyde Analyzer
For the rapid determination of formaldehyde content in textiles.
AATCC Type 128 Crease Recovery Tester
Applicable to fabrics made of any pure or blended fibers.
AATCC-type rapid abrasion tester
It can rapidly assess the dry and wet abrasion resistance of flexible materials such as textiles, paper, leather, and plastics.
ASTM D2594 Static Tensile Recovery Tester
It is used to evaluate the tensile recovery performance of elastic fabrics in static testing and can also perform constant‑load tests: by measuring the elongation of an elastic fabric under a specified tension, the elongation percentage is calculated.
ASTM D3107 Static Tensile Recovery Tester
It is used to evaluate the tensile recovery performance of elastic fabrics in static testing, featuring an aerospace‑grade aluminum frame, 304 stainless steel fixtures and weights, and high‑quality imported linear guides. With its compact design and stable performance, it is an economical yet robust testing instrument well suited for manufacturers, research institutions, commercial inspection agencies, and quality‑control departments.
ASTM D3511 Brush-Type Pilling Tester
This instrument simulates the pilling or fuzzing behavior of fabrics under wearing and normal use conditions, and can be used for materials employed in apparel, home textiles, and automotive interiors, including both woven and knitted fabrics.
CFR 1611 Type 45-Degree Burning Tester
It is primarily used for testing the flame-retardant performance of polyethylene plastic film materials, with a product testing scope that covers non‑rigid, unsupported polyethylene films, including transparent, semi‑transparent, and opaque varieties.
CPAI-84 Fabric Flame-Retardancy Tester
It is used to determine the flame‑retardant performance of curtains, coated products, laminated products, and similar materials, including their tendencies toward afterflame, smoldering, and char formation.
FEW-I Type Automatic Grammage Tester
It is used for automated sample cutting in various chemical experiments on textiles, such as the dissolution of formaldehyde, pH adjustment, and other pre‑treatment procedures in the textile industry.
FL-NIR 8900 Near-Infrared Spectrometer
The next-generation integrating-sphere, grating‑scanning FL‑NIR 8900 near-infrared spectrometer builds on the previous FL‑NIR 8900 model by refining both its software and hardware, achieving greater speed, accuracy, and stability.
GY908A Standard Light Source Box
It is used for assessing color fastness in textiles, printing and dyeing, apparel, leather products, and for evaluating metamerism—where two colors appear identical under one light source but differ under another.
GY908B Standard Light Source Box (Touchscreen)
It is used for assessing color fastness in textiles, printing and dyeing, apparel, leather products, and for evaluating metamerism—where two colors appear identical under one light source but differ under another.
HD026PC Electronic Fabric Comprehensive Strength Tester
The electronic fabric comprehensive strength tester is a domestically produced model in the textile industry, featuring a well‑rounded configuration for strength testing, advanced functionality, high precision, and stable, reliable performance.
Used to determine whether hazardous sharp points are present on textile product attachments and children’s toys.
HH-6 (Double-Row Six-Well) Digital Display Constant-Temperature Water Bath
It can provide constant-temperature auxiliary heating for medical and health care applications, laboratory testing in medical schools, and industrial and mining enterprises as well as research institutions.
JIS-6B Rubbing Colorfastness Tester (Japanese Standard)
Suitable for testing the color fastness of textiles, leather, and other products.
JIS-6G Rubbing Colorfastness Tester (Japanese Standard)
An instrument used to determine the rubbing colorfastness of various dyed textiles, with the rating based on the degree of staining observed on the lining fabric adhered to the friction head.
JIS 1917 Surface Combustion Performance Tester
Test method for surface flammability of textile products. Reference standard: JIS L1917-2000, Test method for the surface flash‑burning performance of textile products.
KMS-M6D Type AATCC Shrinkage Drying Machine
The design complies with the parameters specified in AATCC Monograph M6 for AATCC household laundering test methods 88B, 88C, 124, 130, 135, 142, 143, 150, 172, 179, and 188, as well as the standard requirements of LPI.
KMS-M6 Model AATCC Shrinkage Rate Washing Machine
The KMS-M6 is a testing machine specifically designed to measure the shrinkage of textile fabrics in laboratory settings. It complies with the latest AATCC standards (Table I, IIC, IID, IIIA, IIIB) and meets the requirements of the AATCC‑developed M6 Monograph.
LB057 Nonwoven Fabric Water Absorption Tester
Used for determining the water absorption capacity and the rate of water absorption height of nonwoven materials employed in medical, sanitary, and other applications.
LB141F Type Glass Fiber Cloth Thickness Gauge
Used to test the thickness of fiberglass fabrics, thin sheets, and other materials under varying pressures and specified durations.
LB468A Fully Automatic Mask Breathing Resistance Tester (3‑Head Mold)
The mask breathing resistance tester is used to measure the inspiratory and expiratory resistance of respirators and mask-type protective equipment under specified conditions. It is suitable for use by national occupational safety and health testing institutions and mask manufacturers to conduct relevant tests and inspections on ordinary masks, dust‑proof masks, medical masks, and anti‑smog masks.
LB468 Fully Automatic Mask Breathing Resistance Tester
The mask breathing resistance tester is used to measure the inhalation and exhalation resistance of respirators and mask-type protective equipment under specified conditions. It is suitable for use by national occupational safety and health testing institutions and mask manufacturers to conduct relevant tests and inspections on ordinary masks, dust‑proof masks, medical masks, and anti‑smog masks.
LB815M Mask Flame-Retardancy Tester
It is suitable for determining the flame‑retardant performance of medical masks and all types of protective masks. It can be used by pharmaceutical testing agencies, safety monitoring authorities, and research institutions.
LB921 Seat Belt Webbing Abrasion Tester
The webbing abrasion testing machine is suitable for evaluating the abrasion resistance of various types of webbing and automotive seat belts. The test principle involves subjecting the webbing to reciprocating friction against the two edges of a hexagonal rod for a specified number of cycles, after which the degree of abrasion is assessed to determine product quality.
LB6089 Glove Cut-Resistant Testing Machine (Circular Knife Method)
The test specimen is placed beneath a circular cutting wheel equipped with a counter and subjected to a specified pressure. The cut resistance of specialized protective gloves is evaluated by the rotation of the circular cutting wheel combined with the movement of the test specimen.
LB-IU Leather Rubbing Colorfastness Tester
Used to assess the degree of abrasion‑induced damage and discoloration on materials such as leather, textiles, straps, trademarks, cardboard, and others.
LBKX125L Glove Aging and Drying Test Chamber
This product uses recirculating air for constant-temperature drying, features a high degree of智能化, requires no dedicated supervision, and automatically adjusts the temperature based on user settings, achieving optimal drying results in the shortest possible time.
LBLY-216 Composite Insulating Glove Rain-Test Apparatus
It is primarily used for conducting waterproof performance tests and IP‑rated waterproofness assessments on textile garments, communication devices, and automotive components—including insulating gloves, rearview mirrors, car audio systems, automotive electronics, vehicle lighting, automotive lamps, motorcycle lamps, and motorcycle rearview mirrors—as well as outdoor lighting and signaling devices.
Whether you want to customize product features
I still need some examples to refer to ——
Please let us know what you're looking for, and we'll send you relevant materials to help you move your project forward quickly!
Global Partners
Customer Satisfaction
Committed to becoming a leader in China's testing equipment manufacturing industry
Share To
