LB-2602 Desktop Ozone Concentration Detector

Product Introduction: The LB-2602 Desktop Ozone Concentration Analyzer is a multifunctional instrument that integrates gas detection, data display, and other features. It enables convenient on-site monitoring of ozone concentrations. The transmitter employs a high‑quality electrochemical gas sensor, offering rapid response and excellent reliability. Through configurable settings for input channels, real-time ozone concentration monitoring can be easily implemented. The device boasts a user‑friendly, intuitive interface. This instrument provides an economical and practical solution for ozone concentration measurement.

LB-T13 Ceramic Tile Multifunctional Flexural Testing Machine

Product Introduction: The LB‑T13 Multifunctional Flexural Testing Machine for Ceramic Tiles is designed to determine the modulus of rupture and breaking strength of ceramic tiles. It is also suitable for measuring the flexural strength of engineering ceramics, electrical porcelain, daily-use ceramics, ceramic pipes, and brick and tile products.

LBT2611 Pulp Consistency Meter

The pulp freeness tester is a specialized instrument used to determine the drainage characteristics of pulp. Based on the inverse relationship between the pulp’s beating degree and the filtration rate of its suspension, this instrument enables the assessment of fiber condition and the evaluation of the degree of pulp refining. The pulp freeness tester is a standard laboratory testing device designed according to the Schopper–Riegler method, which is the conventional technique for measuring the filtration rate of diluted pulp suspensions.

LBT815W Toy Comprehensive Combustion Tester

Product Introduction: The LBT815W Comprehensive Flammability Tester for Toys is designed to evaluate the flame‑retardant performance of textile materials and children’s toy components under fault and abnormal conditions. This instrument features a highly automated control system with an automatic ignition function, digital time display, convenient observation and recording, and stable, reliable operation.

JZT800PLUS Digital Ultrasonic Flaw Detector

Product Introduction: The JZT800PLUS Digital Ultrasonic Flaw Detector enables fast, convenient, nondestructive, and precise detection, localization, evaluation, and diagnosis of various internal defects in workpieces, including cracks, welds, porosity, blowholes, inclusions, and folds. It is widely used in industries such as power generation, petrochemicals, boiler and pressure vessel manufacturing, steel structures, defense, aerospace, rail transportation, automotive, and machinery. It is a leading instrument in the nondestructive testing field.

LZJ-ZXC-510 Electric Bicycle Comprehensive Tester

The LZJ‑ZXC‑510 electric bicycle comprehensive test machine primarily evaluates the following performance parameters: acceleration, hill-climbing capability, maximum speed, minimum steady‑state speed, coasting performance, fuel consumption, output power, and emissions under standard operating conditions. Application: This equipment is used to simulate riding conditions for bicycles, electric bicycles, and pedal‑assist bicycles. After mounting the assembled vehicle on the test stand, securing the fixtures according to specifications, adjusting the safety devices, and setting the relevant parameters on the computer, the system automatically initiates the test. Testable items include: handlebar brake‑actuation testing, crank‑pedaling drive‑function testing, and roller‑based hill‑climbing performance testing, among others.

LBT-6000L Glass Stress Tester

Product Introduction: The LBT-6000L Glass Stress Tester is designed to measure the surface stress of chemically and physically tempered glass. By guiding light along the glass surface, it employs photoelasticity principles to determine both the surface stress and the depth of the stress layer. This non‑destructive testing instrument is easy to operate, reducing measurement time while enabling real-time monitoring of the glass manufacturing process. It provides a reliable analysis of the surface stress in chemically tempered glass, allowing for an accurate assessment of the degree of tempering.

LBT-JB High-Power Magnetic Stirrer

LBT-JB High-Power Magnetic Stirrer Product Introduction: A magnetic stirrer is a laboratory instrument used for mixing liquids, primarily designed to stir low-viscosity liquids or solid–liquid mixtures. Its operating principle relies on the repulsive and attractive forces between like and unlike magnetic poles: a magnetic field drives a magnetized stirring bar placed within the vessel to rotate in a circular motion, thereby achieving effective liquid mixing. This instrument is easy to use and makes an ideal stirring tool for laboratories in industries such as petrochemicals, pharmaceuticals and healthcare, environmental protection, biochemical analysis, and education and research.

Hard‑shell corrugated pipe outer diameter gauge

This set of gauges is applicable to circular electrical conduit made of plastic insulating material, used for protecting and securing the wiring of wires or cables within buildings or structures.

Plug and socket gauge (customizable)

For the inspection of dimensions of single-phase plugs and sockets for household and similar applications.

Electrical conduit pressure testing machine

JG3050-7 Electrical Conduit Pressure Testing Machine – Product Description The electrical conduit pressure testing machine is suitable for conducting pressure tests on various types of plastic pipes, plastic corrugated pipes, and similar products. A cubic steel block is placed on the specimen, and a slowly increasing force is applied via a lever and weights. A large‑range dial gauge then measures changes in the outer diameter at the compressed section of the specimen, allowing assessment of its mechanical properties.

Pipe marking tool

Pipe marking device; determination of the longitudinal shrinkage rate of thermoplastic pipes; perform the measurement of the longitudinal shrinkage rate of plastic pipes.

LBTH-7A Plastic Pipe Scriber

Determination of Longitudinal Shrinkage Rate of Thermoplastic Pipes: Conducting the test to measure the longitudinal shrinkage rate of plastic pipes.

Electrical conduit impact testing machine

The impact testing machine for electrical conduit is suitable for conducting impact tests on various plastic pipes, corrugated plastic pipes, and similar products, enabling the determination of the impact energy required to cause pipe failure and thereby assessing their impact strength.

Rigid Conduit Bending Tester

This testing machine is suitable for bending tests of insulating electrical conduit and similar materials, with a total bending angle of 180°. After the test, inspect the specimen for any cracks.

Trapezoidal wire spring

Product Introduction: The outer diameter of the trapezoidal wire spring is 0.70 to 1.0 mm smaller than the specified inner diameter of the sleeve.

Electrical conduit bending and fixing device

JG3050-13 Electrical Conduit Bending and Fixing Device. It is used to bend electrical conduits with outer diameters of 16 mm, 20 mm, and 25 mm and a length of 500 mm into a 90° angle without auxiliary bending tools, after which the conduit’s flattening performance is evaluated.

Ball Pressure Tester (Ball Pressure Heat Resistance Test Apparatus)

JG3050-14 Ball Pressure Tester (Ball Pressure Heat‑Resistance Test Apparatus) This device is designed and manufactured in accordance with the relevant standard requirements for ball pressure testing, serving as a specialized instrument for evaluating the heat resistance of nonmetallic materials. It is suitable for conducting heat‑resistance tests on electrical equipment, their components and parts, as well as on non‑ceramic solid electrical insulating materials and other nonmetallic substances.

Heat-Resistance Test Apparatus for Semi-Rigid and Corrugated Conduits

Product Introduction: The JG3050-15 Semi-Rigid and Corrugated Conduit Heat-Resistance Test Apparatus is designed for conducting heat-resistance tests on semi-rigid and corrugated conduits, enabling the determination of the required heat-resistance rating and, consequently, the assessment of their heat‑resistance performance.

Electrical Performance Tester for Electrical Conduit Pipes

Product Introduction: The JG3050-16 Electrical Performance Tester for Electrical Conduit is designed to measure the insulation strength and insulation resistance of electrical insulating conduits and fittings. It operates by applying a specified voltage at a prescribed temperature, ensuring that the test specimen remains intact without breakdown.

Electrical Conduit Combustion Tester

Product Introduction: The Electrical Conduit Combustion Tester is designed and manufactured in accordance with standards such as JG 3050.

Low-temperature test chamber

This instrument is suitable for low-temperature testing of construction materials, electronics, profiles, and plastics, and can also be used in laboratories across research institutes, biomedicine, agriculture, and animal husbandry to cryopreserve biological materials, samples, and specimens at low temperatures.

Constant-temperature and constant-humidity test chamber (temperature and humidity customizable)

Verification Method for Basic Parameters of Environmental Test Equipment: Low-Temperature, High-Temperature, Constant Damp‑Heat, and Cyclic Damp‑Heat Test Equipment

XWR-2406 Oxygen Index Tester

Product Introduction: The XWR-2406 Oxygen Index Tester is suitable for determining the combustion performance of materials such as plastics, rubber, fibers, foam plastics, soft sheets and films, and textiles.

Touchscreen Electric Metal Conduit Bending Testing Machine

The metal pipe bending testing machine is designed for conducting bending tests on metallic conduits and similar materials, with a bending angle of 90°. After the test, the specimen is inspected for any cracks.

Silicone Core Pipe Cold Bending Radius Tester

Silicone‑Core Pipe Cold Bend Radius Tester: Low-Temperature Flexural Performance Testing Equipment — Product Introduction The silicone‑core pipe cold bend radius tester is designed in accordance with the test method for the cold bend radius of silicone‑core pipes specified in JT/T 496‑2004, “High-Density Polyethylene Silicone‑Core Plastic Pipes for Underground Communication Conduits on Highways.” This compact and intuitive instrument is an ideal choice for manufacturing facilities and quality‑control inspection departments. It is used to evaluate the flexural resistance of silicone‑core pipes at low temperatures and is compatible with high‑density polyethylene silicone‑core plastic pipes for underground communication conduits ranging from 32 to 63 mm in diameter.

Metal and Composite Catheter Bending Test Apparatus

The bending test apparatus for metallic and composite conduits is designed for conducting bend tests on materials such as metal conduits, with a bending angle of 90°. After the test, the specimen is inspected for any cracks.

Pipe drop test machine

The pipe drop‑test machine is a specialized impact‑resistance testing device designed for insulated electrical conduit, plastic pipes, and related fittings. It simulates the drop‑impact conditions encountered during transportation and installation, enabling assessment of the materials’ drop‑resistance performance and structural integrity.

AS/NZS 3112 Australian Standard Plug and Socket Gauge

It is used to verify the basic parameters and dimensions of plugs and sockets. The AS/NZS 3112 standard specifies the essential safety requirements for Australian plugs and sockets intended for household and similar applications, with rated currents not exceeding 32 A and operating at extra-low or low voltages.

Stainless Steel Solid Fuse Test Fixture

Under normal conditions, repeatedly insert and remove the fuse holder 20 times at a rate not exceeding ten operations per minute. Subsequently, install a standard fuse conforming to BS 1362 and perform the corresponding mechanical strength tests.