Brick and tile, masonry brick testing equipment

Pavement Brick Permeability Tester (Integrated Type)

This instrument consists primarily of a water tank, an electrical control cabinet, a specimen fixture, and a balance.

LD-34 Permeable Pavement Brick Permeability Coefficient Testing Apparatus

The permeability coefficient testing apparatus for permeable pavement bricks is a device used to determine the permeability coefficient of such bricks. It is manufactured in accordance with GB/T 25993, “Permeable Pavement Bricks and Permeable Pavement Slabs,” and features a simple structure, low cost, ease of operation, and reduced testing expenses.

Concrete Permeability Coefficient Tester

The concrete permeability coefficient tester is equipment used to evaluate pervious cement‑concrete pavements. It is manufactured in accordance with the “Technical Specification for Pervious Cement‑Concrete Pavements” (CJJ/T 135‑2009) and features a simple structure, low cost, ease of operation, and reduced testing expenses.

CMTZW-1 Digital Display Brick and Tile Flexural Testing Machine

It is primarily used to determine the room-temperature flexural strength of cement floor tiles, mineral wool acoustic ceiling panels, bricks, and tiles.

DWR-4 Freeze-Thaw Tester for Masonry Bricks (-40°C)

The fully automatic low-temperature freeze–thaw testing machine consists of three major components: the refrigeration system, the control system, and the water‑filling system.

Concrete pavement brick cutting straightedge

For the inspection of the surface quality of concrete paving bricks

Brick hole rate hanger

This hanger is manufactured in accordance with the test methods for concrete masonry units and bricks.

LJ-2012 Masonry Brick Magnetic Vibration Table (Polished) – Painted

Magnetic‑vibration molding equipment for wall bricks (hereinafter referred to as the magnetic‑vibration molding table) is a patented design and manufactured in accordance with the technical specifications of GBT 25044, “General Requirements for Equipment Used in Preparing Compressive Strength Specimens of Wall Bricks.” Once powered on, the magnetic‑vibration molding table automatically generates a magnetic field; upon power loss, the magnetism dissipates. The vibration table consists primarily of a magnetic disc, a worktable, a base frame, a vibrator, springs, and other components, all integrally welded together. The vibrator is positioned at the central bottom of the worktable, serving to compact and stabilize the specimen during vibration.

QZ-25 Wall Brick Mixer (Small Controller)

The wall‑brick specimen preparation mixer is a state-of-the-art strength‑testing mixing device, patented and manufactured in accordance with the technical specifications of GBT 25044, “General Requirements for Equipment Used in the Preparation of Compressive Strength Specimens of Wall Bricks.”

QZ-20 Wall Brick Mixer (with Large Controller)

The wall‑brick specimen preparation mixer is a state-of-the-art strength‑testing mixing device, patented and manufactured in accordance with the technical specifications of GBT 25044, “General Requirements for Equipment Used in the Preparation of Compressive Strength Specimens of Wall Bricks.”

Masonry brick test mold

It is primarily used for demolding wall‑brick test specimens.

GLM-200 Steel Wheel Abrasion Tester

The steel-wheel abrasion testing machine is suitable for conducting wear‑resistance tests on brittle materials such as unglazed ceramic tiles, mosaics, cement mortar, and cement paving bricks. The unglazed ceramic tile abrasion tester features a compact structure, smooth transmission, low noise, and constant output speed.

NS-2 Type Ball Bearing Wear Testing Machine

It conducts abrasion resistance tests on concrete and its products—such as paving bricks, floor tiles, artificial marble, terrazzo, and other building materials. This specialized testing machine is used to evaluate the wear resistance of pavement and flooring materials and is an essential piece of equipment for municipal, highway, and bridge construction firms, concrete product manufacturers, and research laboratories.

DRS-C214 Type Dauri Wear Testing Machine

It is a specialized testing device for evaluating the abrasion resistance or wear resistance of architectural decorative materials, and it is also one of the essential pieces of equipment required by stone material inspection agencies at all levels, building‑material research laboratories, and large‑scale stone enterprises.

SP-256 Vertical Shrinkage Tester for Masonry Bricks

A precision instrument for measuring changes in length, it is suitable for use in brick‑making plants, research institutions, colleges and universities, and construction engineering departments to determine the shrinkage and expansion deformations of sintered common bricks, fly ash bricks, and other types of wall‑building bricks.

ZFX-10A Automatic Frost-Resistant Brick and Tile Testing Chamber

It is one of the specialized devices primarily used by brick and tile manufacturers, construction firms, and testing laboratories for quality control.

ZSA-5A Brick and Tile Bursting Steaming Oven

It is used to detect lime‑spalling in various brick and tile products, including sintered common bricks, sintered porous bricks, and hollow bricks.

DJ-58 Red Brick Multi-Function Fixture

When used in conjunction with a compression testing machine, it secures red bricks in a fixed position, ensuring that the bricks remain in a standardized test condition under compressive load. This allows for uniform stress application, enabling accurate measurement of the bricks’ compressive strength and providing data to assess their quality and load-bearing capacity.

Specialized grouting mortar for wall bricks (30 kg)

It is primarily used to firmly bond bricks together, forming a stable wall structure.

MR-DJ15 Single-Brick Single-Shear Tester / MR-DYS75 In-Situ Double-Shear Tester for Single Bricks

The single-brick in-situ single‑shear apparatus is a specialized instrument used to determine the shear strength of masonry.

LBT-1000-3A Thermal Conductivity Meter

This instrument is suitable for measuring the thermal conductivity of refractory insulation materials, ceramic fibers, felts, textiles, boards, bricks, and other materials at various temperatures. With an optional frame, it can also be used to measure powdered materials.

LBT-1000-3B Thermal Conductivity Meter (with Electric Loading for Specimens)

This instrument is suitable for measuring the thermal conductivity of refractory insulation materials, ceramic fibers, felts, textiles, boards, bricks, and other materials at various temperatures.

Sintered Common Brick Pendulum Impact Tester

The pendulum impact tester is suitable for on-site testing of the compressive strength of bricks and masonry mortar in ordinary sintered brick masonry, the compressive strength of autoclaved aerated concrete blocks and mortar, wood strength, yield strength of steel, and compressive strength of concrete.

LBT-910 Mortar Brick Testing Instrument

The mortar push‑out tester complies with the requirements of GB/T 50315, “Technical Standard for On‑Site Testing of Masonry Works,” and is suitable for estimating the compressive strength of masonry mortar in walls constructed with 240 mm‑thick sintered common bricks, sintered porous bricks, autoclaved aerated sand‑lime bricks, or autoclaved fly ash bricks.

SL-80 In-Situ Mortar Pressure Tester for Masonry

The in-situ pressure tester is primarily designed to estimate the compressive strength of ordinary brick masonry with a thickness of 240 mm. It is the preferred instrument for comprehensive on-site assessment of the compressive strength of brick masonry and complies with GB/T 50315-2011, “Technical Standard for On-Site Testing of Masonry Works.”

LBT-550 Autoclaved Aerated Concrete Solid Brick Drying Shrinkage Rapid Testing Apparatus

This instrument is suitable for the rapid determination of the linear drying shrinkage of autoclaved sand‑lime solid bricks and solid masonry units.

LBT-Z101 Vacuum Saturation Pump Container Test Barrel

The cylinder of the vacuum saturation apparatus is crafted from high-quality stainless steel, while the cylinder head is made of 20 mm-thick, highly transparent acrylic. It comes with a U‑shaped silicone sealing ring included at no extra charge and features a large capacity, lightweight construction, and excellent sealing performance.

LBT-Z102 Sand-Based Permeable Brick Water Permeability Tester

The permeability rate tester for sand-based permeable bricks uses program-controlled simulation of water flow rates—ranging from light rain to heavy downpours—to assess the permeability of sand-based permeable bricks, or to conduct analogous tests meeting equivalent experimental requirements.

Caliper for ZK-1 bricks

The brick caliper is used in brick and tile manufacturing enterprises and by quality inspection departments to measure the external dimensions, bending, and protrusions of impurities on wall‑building bricks, including sintered common bricks, sintered porous bricks, hollow bricks and hollow blocks, sintered clay bricks, non‑fired bricks, fly ash bricks, slag bricks, and carbonized bricks.

LBT-2101 Concrete Pavement Brick Permeability Tester

This apparatus complies with GB/T 32987-2016 “Test Methods for Properties of Concrete Pavement Bricks” and is used for permeability testing of concrete pavement bricks.