Home page

SYA-80 Building Fan Coil Unit Testing Equipment System

Name: SYA-80 Building Fan Coil Unit Testing Equipment System
Brand: Laibote (Tianjin) Testing Machinery
Availability: InStock

This laboratory is dedicated to the thermal‑performance testing of fan coil units and can accurately measure their cooling capacity, heating capacity, and airflow rates. It also supports other standard‑condition tests and extended‑range experiments, providing customers with a comprehensive testing suite that meets the requirements for product sampling inspections as well as product development and system‑matching applications. The facility comprises a single test chamber designed to satisfy the environmental and climatic conditions required for fan coil unit testing, and it is equipped with an airflow measurement system.

Category:

Building Energy-Efficient Material Testing Equipment

Keywords:

E-mail:

lbt@lbt.ltd

WhatsApp:

+86-15102211717

Consult

SYA-80 Building Fan Coil Unit Testing Equipment System

Description

Product Introduction

This laboratory is dedicated to the thermal performance testing of fan coil units and can accurately measure their cooling capacity, heating capacity, and airflow rates. It also supports other standard‑condition tests and extended‑range experiments, providing customers with a comprehensive testing suite that meets the requirements for product sampling inspections as well as product development and system‑matching applications. The facility comprises a single test chamber designed to satisfy the environmental and climatic conditions required for fan coil unit testing, and it is equipped with an airflow measurement system.

Product Features:

The performance test rig for fan coil units comprises six major subsystems: the control system, the environmental chamber, the air‑flow system, the water‑flow system, the water‑cooling system, and the air‑cooling system.

1. Control System: Primarily composed of an system control console, electrical components, a microcomputer system, sensors, instruments, pushbuttons, and other automatic and electrical control elements.

2. Environmental Chamber: Constructed from polyurethane‑cored, single‑sided stainless steel sandwich panels, it is equipped with a specimen mounting rack, as well as air and water circulation systems.

3. Airflow System: Following the direction of airflow, the system consists, in sequence, of a static pressure chamber, a mixing chamber, a mixer, an air sampling device, a receiving chamber, a front flow‑conditioning plate, an exhaust chamber, a rear flow‑conditioning plate, an auxiliary fan, an air damper, and a return‑air duct. It is primarily used to measure air flow rate and the dry‑bulb and wet‑bulb temperatures of the air.

4. Water Circuit System: Composed of a chilled-water system and a hot-water system, it is primarily used to measure water temperature and flow rate. It includes a spray pump, a supply water tank, a fine‑adjustment water tank, piping, an electromagnetic flowmeter, a flow‑control valve, a drain valve, a reversing sampling and weighing system, and the test specimen.

(1) Chilled water system: It mainly consists of the following equipment:

a. The fully enclosed refrigeration compressor–condenser unit is water-cooled; due to its relatively small cooling capacity, two compressors are installed.

b. Tank-type evaporator (with agitator): The evaporator is a tank-type direct‑evaporation unit, operating at an evaporation temperature of –2°C to –5°C. It has an evaporation surface area of 20 m² and is configured in two separate sections for easy adjustment. An agitator is installed to ensure uniform water temperature throughout the tank.

(2) Hot Water System: The hot water tank in the hot water system has a capacity of approximately 0.8 m³ and is designed to operate in coordination with the tank-type evaporator. A tubular electric heater with a power rating of 16 kW is installed inside the hot water tank.

5. Water‑cooling system: It mainly consists of cooling pipelines, a refrigeration unit, a heater, a water circulation pump, a water‑tank evaporator, and a supply water tank. Its primary function is to maintain the temperature of the supply water tank and provide constant‑temperature cooling water.

6. Air‑cooling system: Primarily composed of refrigeration and insulation piping, a refrigeration unit, an air heater, and a circulating fan. Its main function is to maintain a constant ambient temperature. The system employs a Copeland direct‑expansion air-conditioning unit in conjunction with an insulated box‑type fan equipped with an evaporator, supplemented by a controllable heater, to ensure that the external environment meets the steady‑state conditions specified in the relevant standards. The refrigeration units selected by our company not only feature over…

It features multiple self-diagnostic protection functions, including pressure monitoring, overheating protection, and low-temperature start-up. Moreover, thanks to the use of a low‑temperature ester‑based synthetic oil in the main unit, it can operate maintenance‑free in any ambient environment, ensuring long‑term, trouble‑free continuous operation.

Technical Specifications:

Parameter Category	Parameter content
Dry-bulb air temperature	Range: 20°C to 35°C; Accuracy: ±0.1°C
Air wet-bulb temperature	Range: 14°C to 27°C; Accuracy: ±0.1°C
Hot water temperature control	Range: 30°C to 70°C; Accuracy: ±0.1°C
Cold water temperature control	Range: 5°C to 16°C; Accuracy: ±0.1°C
Airflow control	Range: 250 m³/h to 25,000 m³/h; Accuracy: ±1%
Water volume control	Range: 0 to 6,000 kg/h; Accuracy: ±1%
Cooling capacity	Range: 0 ~ 12,600W
Calories	Range: 0 ~ 18,900 W
Power Supply Requirements	AC 380 V; 74 kW three-phase five-wire system traction power
Equipment overall dimensions (total footprint)	Length × Width × Height: 7000×6000×5000 mm

Related Product

WSC-300 Microcomputer-Controlled Steel Strand Stress Relaxation Testing Machine

The WSC-300 microcomputer-controlled steel strand stress relaxation testing machine employs servo control technology and computer-based data acquisition and processing, enabling closed-loop control and automated testing. It comprises four main components: the testing frame, the servo control system, the measurement and control system, and the test fixtures. With a maximum test force of 300 kN, the machine achieves an accuracy class better than 0.5.

YLZ-100 Microcomputer-Controlled Electro-Hydraulic Servo Curbstone Flexural Testing Machine

The YLZ-100 concrete curbstone flexural‑compressive testing machine is used to determine the flexural strength and flexural load of linear curbstones with a length of 1000 mm, as well as the compressive strength of curved curbstones and L‑shaped curbstones with a straight cross‑section. In accordance with JC/T 899‑2016 Concrete Curbstones, it can also be employed to conduct experimental studies on the flexural and compressive strengths of other materials.

WDW Dual-Column Microcomputer-Controlled High- and Low-Temperature Electronic Universal Testing Machine (with Video Extensometer)

The microcomputer-controlled high‑ and low‑temperature electronic universal testing machine consists of the testing machine mainframe, fixtures, a high‑ and low‑temperature chamber, and computer software. The temperature chamber is slid into the mainframe; after opening the chamber door, the specimen is secured in the dedicated fixture. The chamber then heats or cools until the specified temperature is reached.

WDW—Dual-Column Microcomputer-Controlled Electronic Universal Tensile Testing Machine (20 kN)

This machine can perform tests such as tensile, compressive, flexural, tear, 90° peel, 180° peel, shear, adhesion, pull-out force, and elongation at break on rubber, plastics, foamed materials, synthetic resins, films, alloy materials, and other non-metallic and metallic materials.

FAQs

Do you supply full-set testing instruments for asphalt and geotechnical engineering projects?

We offer complete lab solutions including asphalt viscosity tester, asphalt rutting tester, geotextile permeability tester, low-temperature flexibility tester and concrete/cement test equipment, covering raw material detection for road, water conservancy and construction engineering projects

Can you customize fixtures or test machines based on our special test requirements? How about after-sales service and warranty?

We provide non-standard customization of test equipment and customized fixture clamps according to customers’ specimen size and test standards. All our testing machines enjoy 12-month factory warranty; overseas customers get remote online debugging guidance, spare parts supply and technical operation training. Our products have been exported to over 70 countries globally

Which materials can be measured by your Vicat softening point tester?

It measures heat deflection temperature and Vicat softening temperature of plastics, hard rubber, nylon, insulating materials and fiber-reinforced thermosetting composites. Intelligent temperature control guarantees precise heating rate, ideal for plastic raw material incoming inspection and formula development in plastic factories.

Does your pipe pressure burst testing machine control test temperature automatically? What’s its main application?

Yes, the constant-temperature circulating system keeps stable test environment during long-time hydrostatic resistance and instant burst pressure measurement of thermoplastic pipes. It complies with GB6111 standard and serves raw material inspection, new product R&D for plastic pipe manufacturers, third-party testing labs and university laboratories.

What kinds of pipes fit your ring stiffness tester? Can it do long-term creep testing?

This equipment is designed for HDPE, PVC corrugated pipes, plastic drainage pipes and various plastic tubular products. Apart from ring stiffness, ring flexibility and flattening tests, it supports continuous long-term creep tests up to 1000 hours (42 days) as required by industry specifications, widely used for pipe factories and construction quality inspection institutes.

What test items can your WDW series computer-controlled electronic universal testing machine complete? Which international standards can it meet?

Our WDW universal tester is applicable for tension, compression, bending, shearing and peeling tests of metal, plastic, rubber and composite materials. It supports test procedures in accordance with GB, ISO, ASTM, DIN, JIS multiple domestic and global standards. Equipped with high-precision servo drive and dedicated test software, it automatically collects, calculates and exports test data including tensile strength, elongation at break and elastic modulus.

Customer Reviews

Southeast Asia Rubber & Polymer Factory｜Purchase: Vicat Softening Point & Tensile Testing Machine

From Tanaka Hiroshi, R&D Supervisor, Indonesia rubber materials enterprise

2026.06.05

★★★★★

“Laibote’s Vicat softening point tester and electronic tensile machine have been applied to our raw material incoming inspection and new formula development for over one year. High testing accuracy effectively controls our product defect rate. What impresses us most is their responsive after-sale service; technical staff reply our troubleshooting requests within 24 hours even for time zone differences. Compared with expensive European brands, Laibote’s equipment balances quality and price excellently, we plan to expand procurement of auxiliary testing instruments next quarter.”

Middle East Construction Lab｜Purchase: Universal Electronic Testing Machine & Geotextile Test Equipment

From Mohamed Kareem, Lab Manager, UAE third-party construction inspection institute

2026.06.05

★★★★★

“We compared multiple testing equipment brands from Europe and China before cooperating with Laibote. Their WDW universal tester and full-set geotextile testing instruments meet local construction testing standards perfectly. Custom fixtures tailored per our specimen specifications save much testing time. Pre-sale technical communication was patient and professional; engineers provided online operation training after goods arrived. Stable machine performance greatly improves our laboratory’s detection efficiency, we are satisfied with cost performance and overall service.”

European Plastic Pipe Manufacturer｜Purchase: Ring Stiffness & Hydrostatic Burst Tester

From Thomas Bennett, Quality Director, UK plastic pipe factory

2026.06.05

★★★★★

“We have purchased two sets of pipe testing equipment from Laibote (Tianjin) for 18 months. The ring stiffness and hydrostatic burst testing machines run stably for daily batch inspection, test data matches ISO standard requirements precisely, and the intelligent test software is easy for our operators to master. Their after-sales team offers timely remote technical guidance whenever we have operational problems, spare parts supply is efficient. We have arranged a second bulk order for our new production workshop and will recommend Laibote’s testing machines to our industry partners across Europe.”

Consult

We will contact you within one working day. Please pay attention to your email.