Testing machine accessories, fixtures, and tooling components
LBTA-128 Rubber, Silicone, Leather, and Fabric Non-Metallic Pneumatic Tensile Fixture (10 kN)
This product is suitable for conducting tensile tests on metals, non-metals, adhesives, insulation materials, wires, cables, woven fabrics, paper, waterproofing membranes, and small‑diameter metal filaments, among other products.
LBTA-129 pneumatic fixture for leather, fabric, plastic, and metal materials (5 kN)
This product is suitable for conducting tensile tests on metals, non-metals, adhesives, thermal insulation materials, wires, cables, woven fabrics, paper, waterproofing membranes, and small‑diameter metal filaments, among other products.
LBTA-130 Pneumatic Wedge-Type Tensile Fixture (50 kN)
This product is suitable for conducting tensile tests on metals, non-metals, adhesives, thermal insulation materials, wires, cables, woven fabrics, paper, waterproofing membranes, and small‑diameter metal filaments, among other products.
LBTA-131 Fine Dental Ceramic Three- and Four-Point Bending Fixture
This fixture, in conjunction with a testing machine, is used for three- and four-point bending tests on ceramics and is also suitable for measuring the flexural strength of engineering ceramics, electrical porcelain, daily-use ceramics, ceramic pipes, and brick and tile products.
LBTA-132 Ceramic Biaxial Flexural Strength Fixture
This fixture, in conjunction with a testing machine, is used for biaxial flexural strength testing of ceramics and is also suitable for measuring the flexural strength of engineering ceramics, electrical porcelain, daily-use ceramics, ceramic pipes, and brick-and-tile products.
Interlaminar Shear Property Test Fixture for LBTA-133 Composite Material
This fixture, in conjunction with a testing machine, is used for interlaminar shear property testing of composite materials. It complies with the requirements of standards such as ASTM D2334.
LBTA-135 Rigid Plastic Compression Performance Test Fixture
This fixture, in conjunction with a testing machine, is used for compressive property testing of rigid plastics. It complies with the requirements of standards such as ASTM D695‑2015.
V-notch shear test fixture for LBTA-136 composite material
This fixture, in conjunction with a testing machine, is used for V‑notch shear testing of composite materials. It complies with the requirements of standards such as ASTM D7078.
LBTA-137 Paper Softness Testing Fixture
This fixture, used in conjunction with a testing machine, is intended for determining the softness of paper. It complies with the requirements of standards such as GB/T 8942, “Determination of Paper Softness.”
LBTA-138 Paper Shear Test Fixture
This fixture, in conjunction with a testing machine, is used for paper shear‑strength testing. It complies with the requirements of standards such as GB/T 8942, “Determination of Paper Softness.”
LBTA-139 Plastic Flexural Properties Three-Point Bending Fixture (250 mm)
This fixture, in conjunction with a testing machine, is used for flexural testing of specimens made from various materials. It complies with the requirements of standards such as GB/T 9341 “Determination of Flexural Properties of Plastics” and ISO 178:2003.
LBTA-150 Plastic Flexural Properties Three-Point Bending Fixture (250 mm Hardened)
This fixture, in conjunction with a testing machine, is used for flexural testing of specimens made from various materials. It complies with the requirements of standards such as GB/T 9341 “Determination of Flexural Properties of Plastics” and ISO 178:2003.
LBTA-151 Heavy-Duty Metal Three-Point Bend Test Fixture (100 kN)
This fixture, in conjunction with a testing machine, is used for various heavy‑duty metal three‑point bending tests. It complies with the standard requirements of GB/T 14452 “Test Methods for Mechanical Properties of Metals—Bending,” ASTM E290‑09, and other relevant standards.
LBTA-152 Three-Point Bending Test Fixture for Sandwich Structures
This fixture, when used in conjunction with a testing machine, is intended for flexural property testing of sandwich structures. It complies with the requirements of standards such as GB/T 1456, “Test Method for Flexural Properties of Sandwich Structures,” and ASTM C393.
LBTA-153 Glass Four-Point Bending Fixture
This fixture, in conjunction with a testing machine, is used for glass bending‑fixture tests.
LBTA-155 Glass Three-Point Bending Fixture
This fixture, in conjunction with a testing machine, is used for glass bending‑fixture tests.
LBTA-156 Test Aluminum Compression Fixture (200 mm)
This fixture, in conjunction with a testing machine, is used for compression tests on various materials.
Compression Performance Test Fixture for LBTA-157 Finished Plywood
This fixture, in conjunction with a testing machine, is used for determining the compressive properties of wood-based panels and veneered wood-based panels. It complies with the requirements of standards such as GB/T 17657 “Test Methods for Physical and Mechanical Properties of Wood-Based Panels and Veneered Wood-Based Panels” and ISO 604:2009.
LBTA-158 Tensile Fixture for Film and Paper Materials
This product is suitable for tensile testing of film and paper materials. It complies with the standards GB/T 1040.3 and ASTM D1004-07.
LBTA-159 Nonmetallic Material Tensile Test Fixture (Small Corrugated Aluminum Fixture)
This product is suitable for tensile testing of non-metallic material specimens.
LBTA-160 Nonmetallic Material Tensile Testing Fixture (Small Corrugated Steel Clamp)
This product is suitable for tensile testing of non-metallic material specimens.
LBTA-161 Non-Metallic Material Tensile Test Fixture (Mesh‑Pattern Double‑Clamp Iron Fixture)
This product is suitable for tensile testing of non-metallic material specimens.
This product is suitable for tensile testing of non-metallic material specimens, such as films and papers. Reference standard: ASTM D822.
This product is suitable for tensile testing of non-metallic material specimens, such as films and papers. Reference standard: ASTM D822.
LBTA-165 Thin-Section Material Tensile Testing Fixture (Small Corrugated Steel Fixture)
This product is suitable for tensile testing of non-metallic material specimens, such as films and papers. Reference standard: ASTM D822.
This product is suitable for tensile testing of samples made from non-metallic materials such as films, papers, copper foils, aluminum foils, and more. Reference standard: ASTM D822.
This product is suitable for tensile testing of specimens made from non-metallic materials such as films, papers, copper foils, aluminum foils, and others. Reference standards: ASTM D88-10, GB/T 1040.3, ISO 527-3:1995.
Fixture for Tensile Testing of Battery Electrode Weld Strength in LBTA-168
This product is suitable for tensile testing of battery electrode sheets.
LBTA-169 Hardened Three-Point Flexural Fixture, 150 mm
This product is suitable for conducting bending and flexural tests on a wide range of materials, including metals, non-metals, adhesives, insulation materials, wires, cables, woven fabrics, paper, waterproofing membranes, and small‑diameter metal filaments.
LBTA-170 Double-Sided Locking Shear Clamp for Thin-Film Plastics
This product is suitable for tensile testing of specimens made from non-metallic materials such as films, papers, copper foils, aluminum foils, and others. Reference standards: ASTM D88-10, GB/T 1040.3, ISO 527-3:1995.
Whether you want to customize product features
I still need some examples to refer to ——
Please let us know what you're looking for, and we'll send you relevant materials to help you move your project forward quickly!
Global Partners
Customer Satisfaction
Committed to becoming a leader in China's testing equipment manufacturing industry
Share To
Contact Us
Mobile:+86-15102211717
Whatsapp:+86-15102211717
E-mail:lbt@lbt.ltd
Address:Tianjin Jinghai Economic Development Zone