MTSH-13 Bellows Curing Box
Category:
Keywords:
E-mail:
WhatsApp:
Description
Product Introduction:
A specialized temperature‑and‑humidity control device for various geosynthetic materials. This newly developed curing apparatus, refined and enhanced through further improvements, is an essential testing instrument for laboratories in research institutions, the building‑materials sector, and the construction industry.
Product Features:
1. In line with global environmental trends, featuring a completely fluorine-free design.
2. Blue-screen LCD microcomputer control; allows presetting of 30 temperature–humidity control segments, supports repeated stepwise adjustments, and enables automatic operation of stepped temperature–humidity programs.
3. Equipped with a built-in tempered glass door for easy observation and operation.
4. Fuzzy PID controller with minimal temperature‑control accuracy fluctuations; the control cycle is 100 steps, and up to 30 work segments can be programmed, with a maximum runtime of 99 hours and 59 minutes.
5. It features a mirror-polished stainless steel inner liner with rounded corners, and the partition brackets are designed for automatic installation and removal, making it easy to clean the working chamber.
6. The left side of the enclosure is equipped with a 30 mm-diameter test port, allowing for flexible wiring to suit the installation environment.
7. Place the shaker inside the chamber to perform constant-temperature shaking cultivation. The working chamber is equipped with an illumination lamp for convenient observation of the experimental process.
8. Ultrasonic humidifier with intelligent atomization and a large-capacity water tank, featuring automatic shut-off in case of water or power failure.
9. The humidity sensor is an imported model, eliminating the hassle of frequent replacement of the wet‑bulb and dry‑bulb wicks.
10. Equipped with a branded compressor and a circulating fan, and designed with an air‑duct circulation concept, this unit ensures uniform temperature and humidity within the chamber, preventing sample volatilization and dry‑burning caused by excessive airflow during experiments.
11. Optional features include built-in humidification, Modbus RTU (485) communication, a USB interface, a printer, and leakage protection. Two partitions are standard; up to eight partitions can be optionally installed.
Technical specifications:
| Product model | Temperature control range | Humidity control range | Power (kW) | Volume (L) | Inner liner depth wide Height (mm) |
| 30 | 0-60℃ | 45–95% RH ± 5% | 0.6 | 30 | 250×300×350 |
| 50 | 0.8 | 50 | 300×400×400 | ||
| 80 | 0.8 | 80 | 350×450×450 | ||
| 150 | 0.9 | 150 | 400×500×730 | ||
| 250 | 1 | 250 | 500×500×950 | ||
| 350 | 1.2 | 350 | 500×600×1100 | ||
| 460 | 1.4 | 460 | 650×650×1100 | ||
| 560 | 1.6 | 560 | 650×750×1150 | ||
| 660 | 1.8 | 660 | 650×850×1200 |
Related Product
WSC-300 Microcomputer-Controlled Steel Strand Stress Relaxation Testing Machine
The WSC-300 microcomputer-controlled steel strand stress relaxation testing machine employs servo control technology and computer-based data acquisition and processing, enabling closed-loop control and automated testing. It comprises four main components: the testing frame, the servo control system, the measurement and control system, and the test fixtures. With a maximum test force of 300 kN, the machine achieves an accuracy class better than 0.5.
YLZ-100 Microcomputer-Controlled Electro-Hydraulic Servo Curbstone Flexural Testing Machine
The YLZ-100 concrete curbstone flexural‑compressive testing machine is used to determine the flexural strength and flexural load of linear curbstones with a length of 1000 mm, as well as the compressive strength of curved curbstones and L‑shaped curbstones with a straight cross‑section. In accordance with JC/T 899‑2016 Concrete Curbstones, it can also be employed to conduct experimental studies on the flexural and compressive strengths of other materials.
The microcomputer-controlled high‑ and low‑temperature electronic universal testing machine consists of the testing machine mainframe, fixtures, a high‑ and low‑temperature chamber, and computer software. The temperature chamber is slid into the mainframe; after opening the chamber door, the specimen is secured in the dedicated fixture. The chamber then heats or cools until the specified temperature is reached.
WDW—Dual-Column Microcomputer-Controlled Electronic Universal Tensile Testing Machine (20 kN)
This machine can perform tests such as tensile, compressive, flexural, tear, 90° peel, 180° peel, shear, adhesion, pull-out force, and elongation at break on rubber, plastics, foamed materials, synthetic resins, films, alloy materials, and other non-metallic and metallic materials.
FAQs
Customer Reviews
Southeast Asia Rubber & Polymer Factory｜Purchase: Vicat Softening Point & Tensile Testing Machine
2026.06.05
★★★★★
Middle East Construction Lab｜Purchase: Universal Electronic Testing Machine & Geotextile Test Equipment
2026.06.05
★★★★★
European Plastic Pipe Manufacturer｜Purchase: Ring Stiffness & Hydrostatic Burst Tester
2026.06.05
★★★★★
Consult
We will contact you within one working day. Please pay attention to your email.
Keywords:
MTSH-13 Bellows Curing Box
Whether you want to customize product features
I still need some examples to refer to ——
Please let us know what you're looking for, and we'll send you relevant materials to help you move your project forward quickly!
Global Partners
Customer Satisfaction
Committed to becoming a leader in China's testing equipment manufacturing industry
Share To
Contact Us
Mobile:+86-15102211717
Whatsapp:+86-15102211717
E-mail:lbt@lbt.ltd
Address:Tianjin Jinghai Economic Development Zone