LBT-2600WF Vacuum Drying Negative-Pressure Internal Microcirculation Test Chamber (2.8 m³)
Category:
Keywords:
E-mail:
WhatsApp:
Description
Product Introduction:
A vacuum drying oven is a cabinet‑type drying device that dries materials under negative pressure. It employs a vacuum pump to remove air and moisture, creating a vacuum within the chamber, which lowers the boiling point of water and accelerates the drying process. It is used for powder drying, material annealing, semiconductor processing, testing of new‑energy batteries, encapsulation testing of aerospace components, as well as degassing and dehydration during electronic product manufacturing, and for hardening and drying applications.
It is widely used in research fields such as electrochemistry, agricultural science, and environmental protection.
The DZF series vacuum drying ovens, built on high‑temperature drying, incorporate a vacuum environment that significantly lowers the boiling point and vapor pressure, providing a dust‑free, vortex‑free drying process and a gentle operating environment. This also facilitates the easy collection, discharge, or reuse of solvent vapors. Furthermore, storage, heating, testing, and drying are all conducted in an oxygen‑free or inert‑gas‑purged atmosphere, thereby minimizing oxidation of the test samples.
Product Features:
Main Controller: Fully automatic 10-inch color touchscreen, Siemens PLC-based intelligent industrial control technology, with a single-screen interface for centralized monitoring and control of temperature and pressure, offering intuitive and convenient touch‑based operation.
Cabinet Structure: 1. Desktop configuration, with the working chamber on the left side and the control system on the right; the vacuum system and its accessories are mounted externally and connected via external vacuum tubing. 2. A separate controlled heating chamber, with the vacuum system linked to the heating chamber through piping. 3. Welded trolley rails at the base of the cabinet.
Enclosure material: High-quality A3 cold-rolled steel sheet, 1.5 mm thick, welded to 150×150×80 mm channel steel; surface finished with electrostatic powder coating in White (color code 9003).
Inner liner material: High-quality SUS304 stainless steel sheet, 3 mm thick, with a brushed finish on the inner surface.
Welding process: The inner surface of the inner liner is finished with a brushed‑plate texture, and the internal joints are sealed using laser low‑temperature full‑penetration welding. Following welding, the components undergo polishing and brushing to achieve a clean, dust‑free finish.
Door seal material: Single-door pull‑open design, with a high‑strength, snap‑on door lock; the tightness of the door closure is adjustable; an integrally molded imported silicone rubber door seal ensures a high vacuum level inside the chamber.
Observation Window: The door is equipped with one ISO‑rated vacuum‑flanged circular glass observation window, 200 mm in diameter.
Insulation material: Aluminum silicate-based ceramic fiber blanket, with a temperature resistance of 400°C, non-combustible properties, and excellent thermal insulation; thickness approximately 100–120 mm.
Safety Features: The equipment is equipped with an independent temperature‑limit protection function that fully disconnects the heater and triggers an alarm when the set temperature is exceeded. Additional protections include over‑temperature alarm with automatic cutoff of the heating power, leakage‑current protection, filament‑breakage alarm, phase‑loss protection, and grounding. It also features door‑open detection: in automatic mode, the device will not initiate hot‑air blowing, inflation, or vacuum‑pumping functions while the door is open.
Technical Specifications:
| Model number | LBT-2600WF Vacuum Drying Negative-Pressure Internal Microcirculation Test Chamber (2.8 m³) |
| Design inner liner dimensions | 1260*1850*1550mm (Width*Depth*Height) |
| Design studio size | 1060*1850*1330mm (Width*Depth*Height) |
| Temperature control range | Room temperature +10℃ to 100℃ |
| Temperature uniformity | ±2℃ (at 45℃) |
| Temperature resolution | 0.1℃ |
| Temperature fluctuation degree | ±1.0℃ (under steady-state conditions) |
| Design ultimate vacuum level | 50Pa |
| Pumping speed | At atmospheric pressure to 50 Pa, ≤30 min |
| Vacuum leak rate | 10 h ≤ 1000 Pa |
| Monitoring system | Configure one set of a 4-channel temperature data logger. |
| Power supply voltage | AC 380V/50Hz three-phase five-wire system |
| Vacuum system | Equipped with a high-power vacuum pump unit, featuring a screw pump as the forepump and a Roots pump as the backing pump. |
| Gas interface | Two air ports, with air and nitrogen inlet ports. |
| Overall dimensions of the machine | 2230*1910*2290mm (Width*Depth*Height) |
Related Product
HC-40 Concrete Multi-functional Strength Tester
The HC-40 concrete multi-functional strength tester is a high-performance testing device integrating multiple advanced technologies, specifically designed for evaluating the strength and quality of concrete.
FAQs
Customer Reviews
European Plastic Pipe Manufacturer｜Purchase: Ring Stiffness & Hydrostatic Burst Tester
2026.06.05
★★★★★
Middle East Construction Lab｜Purchase: Universal Electronic Testing Machine & Geotextile Test Equipment
2026.06.05
★★★★★
Southeast Asia Rubber & Polymer Factory｜Purchase: Vicat Softening Point & Tensile Testing Machine
2026.06.05
★★★★★
Consult
We will contact you within one working day. Please pay attention to your email.
Whether you want to customize product features
I still need some examples to refer to ——
Please let us know what you're looking for, and we'll send you relevant materials to help you move your project forward quickly!
Global Partners
Customer Satisfaction
Committed to becoming a leader in China's testing equipment manufacturing industry
Share To
Contact Us
Mobile:+86-15102211717
Whatsapp:+86-15102211717
E-mail:lbt@lbt.ltd
Address:Tianjin Jinghai Economic Development Zone