Home page

CP-25 Geosynthetic Pneumatic Sample Preparation Machine

This product is designed for sample preparation in geosynthetic testing and is primarily used to prepare specimens required for tests on geotextiles, geomembranes, composite geotextiles, and composite geomembranes. It can meet the sample‑preparation needs of most geosynthetic tests, including mechanical‑property tests such as wide‑strip tensile, strip tensile, trapezoidal tear, and CBR puncture strength, as well as hydraulic‑property tests like effective aperture, vertical permeability coefficient, hydrostatic pressure resistance, and permeability coefficient.

Category:

Geosynthetic Testing Equipment

Keywords:

E-mail:

lbt@lbt.ltd

WhatsApp:

+86-15102211717

Consult

CP-25 Geosynthetic Pneumatic Sample Preparation Machine

Description

Product Introduction:

This product is designed for sample preparation in geosynthetic testing and is primarily used to prepare specimens required for tests on geotextiles, geomembranes, composite geotextiles, and composite geomembranes. It can meet the sample‑preparation needs of most geosynthetic tests, including mechanical property tests such as wide‑strip tensile, strip tensile, trapezoidal tear, and CBR puncture strength, as well as hydraulic property tests like effective aperture, vertical permeability coefficient, hydrostatic pressure resistance, and permeability coefficient.

Technical Specifications:

Parameter item	Parameter value
Itinerary Scope	20mm～60mm
Workbench dimensions	260mm×230mm
External dimensions	380mm×260mm×590mm
Working pressure	0.4 MPa–0.6 MPa (air source optional)
Weight	50kg

Brief structural description:

The film processor mainly consists of: a base, a pressing head, a coupling assembly, a machine body, a manual three‑position five‑way valve, a pneumatic cylinder, a locking nut, and an adjusting nut. (See Figure 1.)

Rotate the handle of the manual three‑position five‑way valve; the air pressure within the cylinder drives the piston rod to perform reciprocating motion, causing the punch to press down and shear the test specimen.

Instructions for use:

1. Connect the air supply line and adjust the pressure to 0.4 MPa.

2. Place the plastic PP board (provided free of charge) on the workbench, and position the specimen on the flat surface of the board.

3. Place the required cutter on the specimen, ensuring that the center of the cutter aligns with the center of the indenter.

4. Operate the handle of the manual three‑position five‑way valve; at this point, the plunger will descend, allowing you to punch out a standard specimen. If the stroke is insufficient, adjust it as follows: position the handle in the middle, loosen lock nut 7, and then raise the adjusting nut to modify the plunger stroke.

5. Our facility manufactures blades in accordance with national standards; custom non-standard blades can also be produced to your specifications.

Related Product

HC-40 Concrete Multi-functional Strength Tester

The HC-40 concrete multi-functional strength tester is a high-performance testing device integrating multiple advanced technologies, specifically designed for evaluating the strength and quality of concrete.

FAQs

Do you supply full-set testing instruments for asphalt and geotechnical engineering projects?

We offer complete lab solutions including asphalt viscosity tester, asphalt rutting tester, geotextile permeability tester, low-temperature flexibility tester and concrete/cement test equipment, covering raw material detection for road, water conservancy and construction engineering projects

Can you customize fixtures or test machines based on our special test requirements? How about after-sales service and warranty?

We provide non-standard customization of test equipment and customized fixture clamps according to customers’ specimen size and test standards. All our testing machines enjoy 12-month factory warranty; overseas customers get remote online debugging guidance, spare parts supply and technical operation training. Our products have been exported to over 70 countries globally

Which materials can be measured by your Vicat softening point tester?

It measures heat deflection temperature and Vicat softening temperature of plastics, hard rubber, nylon, insulating materials and fiber-reinforced thermosetting composites. Intelligent temperature control guarantees precise heating rate, ideal for plastic raw material incoming inspection and formula development in plastic factories.

Does your pipe pressure burst testing machine control test temperature automatically? What’s its main application?

Yes, the constant-temperature circulating system keeps stable test environment during long-time hydrostatic resistance and instant burst pressure measurement of thermoplastic pipes. It complies with GB6111 standard and serves raw material inspection, new product R&D for plastic pipe manufacturers, third-party testing labs and university laboratories.

What kinds of pipes fit your ring stiffness tester? Can it do long-term creep testing?

This equipment is designed for HDPE, PVC corrugated pipes, plastic drainage pipes and various plastic tubular products. Apart from ring stiffness, ring flexibility and flattening tests, it supports continuous long-term creep tests up to 1000 hours (42 days) as required by industry specifications, widely used for pipe factories and construction quality inspection institutes.

What test items can your WDW series computer-controlled electronic universal testing machine complete? Which international standards can it meet?

Our WDW universal tester is applicable for tension, compression, bending, shearing and peeling tests of metal, plastic, rubber and composite materials. It supports test procedures in accordance with GB, ISO, ASTM, DIN, JIS multiple domestic and global standards. Equipped with high-precision servo drive and dedicated test software, it automatically collects, calculates and exports test data including tensile strength, elongation at break and elastic modulus.

Customer Reviews

European Plastic Pipe Manufacturer｜Purchase: Ring Stiffness & Hydrostatic Burst Tester

From Thomas Bennett, Quality Director, UK plastic pipe factory

2026.06.05

★★★★★

“We have purchased two sets of pipe testing equipment from Laibote (Tianjin) for 18 months. The ring stiffness and hydrostatic burst testing machines run stably for daily batch inspection, test data matches ISO standard requirements precisely, and the intelligent test software is easy for our operators to master. Their after-sales team offers timely remote technical guidance whenever we have operational problems, spare parts supply is efficient. We have arranged a second bulk order for our new production workshop and will recommend Laibote’s testing machines to our industry partners across Europe.”

Middle East Construction Lab｜Purchase: Universal Electronic Testing Machine & Geotextile Test Equipment

From Mohamed Kareem, Lab Manager, UAE third-party construction inspection institute

2026.06.05

★★★★★

“We compared multiple testing equipment brands from Europe and China before cooperating with Laibote. Their WDW universal tester and full-set geotextile testing instruments meet local construction testing standards perfectly. Custom fixtures tailored per our specimen specifications save much testing time. Pre-sale technical communication was patient and professional; engineers provided online operation training after goods arrived. Stable machine performance greatly improves our laboratory’s detection efficiency, we are satisfied with cost performance and overall service.”

Southeast Asia Rubber & Polymer Factory｜Purchase: Vicat Softening Point & Tensile Testing Machine

From Tanaka Hiroshi, R&D Supervisor, Indonesia rubber materials enterprise

2026.06.05

★★★★★

“Laibote’s Vicat softening point tester and electronic tensile machine have been applied to our raw material incoming inspection and new formula development for over one year. High testing accuracy effectively controls our product defect rate. What impresses us most is their responsive after-sale service; technical staff reply our troubleshooting requests within 24 hours even for time zone differences. Compared with expensive European brands, Laibote’s equipment balances quality and price excellently, we plan to expand procurement of auxiliary testing instruments next quarter.”

Consult

We will contact you within one working day. Please pay attention to your email.

Keywords:

CP-25 Geosynthetic Pneumatic Sample Preparation Machine

Whether you want to customize product features

I still need some examples to refer to ——

Please let us know what you're looking for, and we'll send you relevant materials to help you move your project forward quickly!

950 +

Global Partners

99 .9%

Customer Satisfaction

Committed to becoming a leader in China's testing equipment manufacturing industry

Share To

Mobile:+86-15102211717

Whatsapp:+86-15102211717
E-mail:lbt@lbt.ltd

Address:Tianjin Jinghai Economic Development Zone

COOKIES

Our website uses cookies and similar technologies to personalize the advertising shown to you and to help you get the best experience on our website. For more information, see our Privacy & Cookie Policy

COOKIES

required

These cookies are necessary for basic functions such as payment. Standard cookies cannot be turned off and do not store any of your information.

analyze

These cookies collect information, such as how many people are using our site or which pages are popular, to help us improve the customer experience. Turning these cookies off will mean we can't collect information to improve your experience.

Feature

These cookies enable the website to provide enhanced functionality and personalization. They may be set by us or by third-party providers whose services we have added to our pages. If you do not allow these cookies, some or all of these services may not function properly.

advertise

These cookies help us understand what you are interested in so that we can show you relevant advertising on other websites. Turning these cookies off will mean we are unable to show you any personalized advertising.

Business License

SEO