Home page

LBT-SL17 Hydraulic and Hydroelectric Rock Mass Drilling Water-Pressure Injection Permeability Testing Apparatus

Name: LBT-SL17 Hydraulic and Hydroelectric Rock Mass Drilling Water-Pressure Injection Permeability Testing Apparatus
Brand: Laibote (Tianjin) Testing Machinery
Availability: InStock

The borehole pumping test apparatus is used to determine the permeability of rock masses, assess their seepage characteristics, and provide fundamental experimental data for designing seepage control measures.

Category:

Rock and rock mass testing instrument

Keywords:

E-mail:

lbt@lbt.ltd

WhatsApp:

+86-15102211717

Consult

LBT-SL17 Hydraulic and Hydroelectric Rock Mass Drilling Water-Pressure Injection Permeability Testing Apparatus

Description

Product Introduction

The borehole water‑pressure testing apparatus is used to determine the permeability of rock masses, assess their seepage characteristics, and provide fundamental experimental data for designing seepage control measures. Its piping system employs non‑welded connections. The testing fluid circuit is separated from the driving fluid circuit, and a variety of test fluids can be employed. The equipment has been designed and developed in accordance with the Ministry of Water Resources’ SL 31‑2003 “Code for Borehole Water‑Pressure Testing in Hydraulic and Hydroelectric Engineering” and SL 345‑2007 “Code for Water‑Injection Testing in Hydraulic and Hydroelectric Engineering,” covering both constant-head and falling-head water‑injection test methods for boreholes.

Equipment composition:

(1) Water-stop plug:

Water-stop plugs shall comply with the following requirements:

1. The embolization length shall be no less than eight times the borehole diameter.

2. The waterstop shall be reliable and easy to operate; hydraulic or pneumatic plugging is recommended.

(2) Water supply equipment:

The pump used in the test shall meet the following requirements:

1. Reliable operation, stable pressure, and uniform water output;

2. At a pressure of 1 MPa, the flow rate shall be maintained at 100 L/min; a pressure‑stabilizing air chamber with a capacity greater than 51 liters shall be installed at the pump outlet, and the suction inlet shall be fitted with one to two layers of filter mesh having apertures smaller than 2 mm. The distance between the suction inlet and the bottom of the water tank shall be no less than 0.3 m. The water‑supply regulating valve shall be flexible and reliable, leak‑free, and preferably not shared with the drilling system.

(3) Measuring equipment:

Pressure gauges and pressure sensors used for pressure measurement shall meet the following requirements:

1. The pressure gauge shall respond promptly; after depressurization, the pointer shall return to zero, and the measurement range shall be maintained within 1/3 to 3/4 of the maximum pressure rating.

2. The pressure sensor’s pressure range shall exceed the test pressure. The flow meter shall operate normally at a pressure of 1.5 MPa, with a measurement range that matches the pump’s output and the capability to measure both forward and reverse flow.

3. It is advisable to conduct the water-pressure test using an automatic recorder capable of measuring both pressure and flow rate.

4. The water level gauge shall be sensitive and reliable, unaffected by water adhering to the borehole wall or dripping within the hole. The gauge’s lead wires shall be regularly inspected.

5. Instruments used for testing shall be stored separately, not shared with drilling operations, and subjected to regular verification.

Equipment Features:

1. Use a high-flow water pump.

2. The structural design is well‑thought‑out, featuring a compact size, light weight, and an elegant, aesthetically pleasing appearance.

3. All pressure-bearing components are made from standard, branded parts, ensuring easy disassembly, a high safety factor, long service life, and convenient maintenance.

4. Pump flow rate: 0–100 L/min

5. Pressure test range: 1 MPa; select the appropriate pressure level based on the customer’s specific requirements.

6. Automatic acquisition of pressure equivalents.

Technical Specifications:

Project	Parameter Details
Product Name	Hydraulic and hydroelectric drilling water‑hole water‑pressure testing apparatus
Product model	LBT-SL17
Basic Principle	Water is injected under pressure using a booster pump, and flow rate and pressure are measured via flow meters and pressure sensors.
Test pressure	1MPa
Traffic	100L/min
Test medium	Water
Pressure control method	Automatic control
Ambient temperature	Room temperature
Number of samples	1 route
Precision	≤1%
Structural Composition	Hydraulic pressure device, flow and pressure acquisition device
Scope of Application	Water-pressure borehole water-pressure test, water-injection test under normal water pressure, and water-extraction and water-injection test.

Related Product

WSC-300 Microcomputer-Controlled Steel Strand Stress Relaxation Testing Machine

The WSC-300 microcomputer-controlled steel strand stress relaxation testing machine employs servo control technology and computer-based data acquisition and processing, enabling closed-loop control and automated testing. It comprises four main components: the testing frame, the servo control system, the measurement and control system, and the test fixtures. With a maximum test force of 300 kN, the machine achieves an accuracy class better than 0.5.

YLZ-100 Microcomputer-Controlled Electro-Hydraulic Servo Curbstone Flexural Testing Machine

The YLZ-100 concrete curbstone flexural‑compressive testing machine is used to determine the flexural strength and flexural load of linear curbstones with a length of 1000 mm, as well as the compressive strength of curved curbstones and L‑shaped curbstones with a straight cross‑section. In accordance with JC/T 899‑2016 Concrete Curbstones, it can also be employed to conduct experimental studies on the flexural and compressive strengths of other materials.

WDW Dual-Column Microcomputer-Controlled High- and Low-Temperature Electronic Universal Testing Machine (with Video Extensometer)

The microcomputer-controlled high‑ and low‑temperature electronic universal testing machine consists of the testing machine mainframe, fixtures, a high‑ and low‑temperature chamber, and computer software. The temperature chamber is slid into the mainframe; after opening the chamber door, the specimen is secured in the dedicated fixture. The chamber then heats or cools until the specified temperature is reached.

WDW—Dual-Column Microcomputer-Controlled Electronic Universal Tensile Testing Machine (20 kN)

This machine can perform tests such as tensile, compressive, flexural, tear, 90° peel, 180° peel, shear, adhesion, pull-out force, and elongation at break on rubber, plastics, foamed materials, synthetic resins, films, alloy materials, and other non-metallic and metallic materials.

FAQs

Do you supply full-set testing instruments for asphalt and geotechnical engineering projects?

We offer complete lab solutions including asphalt viscosity tester, asphalt rutting tester, geotextile permeability tester, low-temperature flexibility tester and concrete/cement test equipment, covering raw material detection for road, water conservancy and construction engineering projects

Can you customize fixtures or test machines based on our special test requirements? How about after-sales service and warranty?

We provide non-standard customization of test equipment and customized fixture clamps according to customers’ specimen size and test standards. All our testing machines enjoy 12-month factory warranty; overseas customers get remote online debugging guidance, spare parts supply and technical operation training. Our products have been exported to over 70 countries globally

Which materials can be measured by your Vicat softening point tester?

It measures heat deflection temperature and Vicat softening temperature of plastics, hard rubber, nylon, insulating materials and fiber-reinforced thermosetting composites. Intelligent temperature control guarantees precise heating rate, ideal for plastic raw material incoming inspection and formula development in plastic factories.

Does your pipe pressure burst testing machine control test temperature automatically? What’s its main application?

Yes, the constant-temperature circulating system keeps stable test environment during long-time hydrostatic resistance and instant burst pressure measurement of thermoplastic pipes. It complies with GB6111 standard and serves raw material inspection, new product R&D for plastic pipe manufacturers, third-party testing labs and university laboratories.

What kinds of pipes fit your ring stiffness tester? Can it do long-term creep testing?

This equipment is designed for HDPE, PVC corrugated pipes, plastic drainage pipes and various plastic tubular products. Apart from ring stiffness, ring flexibility and flattening tests, it supports continuous long-term creep tests up to 1000 hours (42 days) as required by industry specifications, widely used for pipe factories and construction quality inspection institutes.

What test items can your WDW series computer-controlled electronic universal testing machine complete? Which international standards can it meet?

Our WDW universal tester is applicable for tension, compression, bending, shearing and peeling tests of metal, plastic, rubber and composite materials. It supports test procedures in accordance with GB, ISO, ASTM, DIN, JIS multiple domestic and global standards. Equipped with high-precision servo drive and dedicated test software, it automatically collects, calculates and exports test data including tensile strength, elongation at break and elastic modulus.

Customer Reviews

Southeast Asia Rubber & Polymer Factory｜Purchase: Vicat Softening Point & Tensile Testing Machine

From Tanaka Hiroshi, R&D Supervisor, Indonesia rubber materials enterprise

2026.06.05

★★★★★

“Laibote’s Vicat softening point tester and electronic tensile machine have been applied to our raw material incoming inspection and new formula development for over one year. High testing accuracy effectively controls our product defect rate. What impresses us most is their responsive after-sale service; technical staff reply our troubleshooting requests within 24 hours even for time zone differences. Compared with expensive European brands, Laibote’s equipment balances quality and price excellently, we plan to expand procurement of auxiliary testing instruments next quarter.”

Middle East Construction Lab｜Purchase: Universal Electronic Testing Machine & Geotextile Test Equipment

From Mohamed Kareem, Lab Manager, UAE third-party construction inspection institute

2026.06.05

★★★★★

“We compared multiple testing equipment brands from Europe and China before cooperating with Laibote. Their WDW universal tester and full-set geotextile testing instruments meet local construction testing standards perfectly. Custom fixtures tailored per our specimen specifications save much testing time. Pre-sale technical communication was patient and professional; engineers provided online operation training after goods arrived. Stable machine performance greatly improves our laboratory’s detection efficiency, we are satisfied with cost performance and overall service.”

European Plastic Pipe Manufacturer｜Purchase: Ring Stiffness & Hydrostatic Burst Tester

From Thomas Bennett, Quality Director, UK plastic pipe factory

2026.06.05

★★★★★

“We have purchased two sets of pipe testing equipment from Laibote (Tianjin) for 18 months. The ring stiffness and hydrostatic burst testing machines run stably for daily batch inspection, test data matches ISO standard requirements precisely, and the intelligent test software is easy for our operators to master. Their after-sales team offers timely remote technical guidance whenever we have operational problems, spare parts supply is efficient. We have arranged a second bulk order for our new production workshop and will recommend Laibote’s testing machines to our industry partners across Europe.”

Consult

We will contact you within one working day. Please pay attention to your email.