Home page

LBT-T227 Vertical Fully Automatic Coating Spray Booth

Name: LBT-T227 Vertical Fully Automatic Coating Spray Booth
Brand: Laibote (Tianjin) Testing Machinery
Availability: InStock

During coating performance testing, laboratory personnel must prepare a large number of uniformly consistent coated test panels. However, conventional manual spraying relies heavily on the operator’s experience and skill, making it difficult to ensure uniformity and consistency in the resulting coatings—particularly when applying coatings to large‑area panels—and potentially posing health risks to operators and environmental hazards if performed improperly.

Category:

Paint, Coating Film, and Coating Testing Instruments

Keywords:

E-mail:

lbt@lbt.ltd

WhatsApp:

+86-15102211717

Consult

LBT-T227 Vertical Fully Automatic Coating Spray Booth

Description

Product Introduction

During coating performance testing, laboratory personnel must prepare a large number of uniformly consistent coated test panels. However, traditional manual spraying relies heavily on the operator’s experience and skill, making it difficult to ensure uniformity and consistency—particularly when coating large‑area panels—and posing potential health risks to operators and environmental hazards if not performed properly. In response to this situation and in light of other products available on the market, our company has developed a fully automated paint‑spraying cabinet, which offers the following advantages:

◆ Integrates automated spraying and dry‑spray filtration technologies, enabling enclosed spray operations that completely isolate operators from paint mist, ensuring health and environmental safety.

◆ Equipped with a studio intake air filtration system to ensure the painting process remains free from external contamination;

◆ The exhaust gases generated by the spray process are routed through a uniquely designed dual‑stage exhaust filtration system, effectively minimizing environmental pollution from painting operations.

◆ Equipped with an imported Graco automatic spray gun, it can automatically adjust multiple spraying parameters, such as spray width, atomization, feed pressure, and ultra-precise paint flow rate.

◆ The automatic spray gun can be quickly attached and detached, allowing users to swiftly switch between different nozzles.

◆ The pressure‑fed spray gun, compared with gravity‑fed and suction‑fed models, offers more convenient adjustment of the spray output, which is independent of the air supply pressure (atomization pressure), resulting in more stable and precise spraying.

◆ 10-inch touchscreen control, powerful visual operation

◆ Allows editing and saving multiple spray‑coating programs; also features preset intelligent spray‑coating routines to enable users unfamiliar with spray‑coating operations to complete spraying with a single click.

◆ The machine features a servo control system, supporting horizontal, vertical, and cross‑spraying modes, and allows for flexible configuration of spray zones, minimizing material waste and缩短 spraying time—doubling efficiency!

◆ Removable specimen rack, enabling customers to easily switch between samples of different materials and reducing the cycle time of spray‑coating operations.

◆ The inner walls of the instrument are coated with a Teflon non-stick layer for easy cleaning.

◆ Disposable cups are used to hold samples awaiting spraying, offering simplicity and convenience, eliminating the need for cleaning, and keeping costs low.

Technical Specifications:

Parameter item	Specifications
Maximum spray area	12 test panels measuring 150 mm × 75 mm each
Test panel rack rotation angle	90 degrees
Adjustable spray speed	Horizontal direction: 0–1000 mm/s; vertical direction: 0–200 mm/s.
The distance between the test panel and the spray gun can be adjusted.	100mm–300mm (auto-adjusting)
Atomization pressure	0-0.7MPa
Spray pattern pressure	0-0.7MPa
Feed pressure	0-0.7MPa
Maximum compressed air pressure	0.7MPa
Gas consumption	18 m³/h
Exhaust pipe diameter	150mm
Standard spray gun	GRACO automatic spray gun, LVMP model, with a nozzle diameter of 1.0 mm.
External dimensions	980 mm × 1000 mm × 1850 mm (width × depth × height)
Power supply	220V, 50/60Hz
Total machine power	1.5 KW

Note: Our company also accepts orders for coating equipment tailored to other special requirements.

Related Product

WSC-300 Microcomputer-Controlled Steel Strand Stress Relaxation Testing Machine

The WSC-300 microcomputer-controlled steel strand stress relaxation testing machine employs servo control technology and computer-based data acquisition and processing, enabling closed-loop control and automated testing. It comprises four main components: the testing frame, the servo control system, the measurement and control system, and the test fixtures. With a maximum test force of 300 kN, the machine achieves an accuracy class better than 0.5.

YLZ-100 Microcomputer-Controlled Electro-Hydraulic Servo Curbstone Flexural Testing Machine

The YLZ-100 concrete curbstone flexural‑compressive testing machine is used to determine the flexural strength and flexural load of linear curbstones with a length of 1000 mm, as well as the compressive strength of curved curbstones and L‑shaped curbstones with a straight cross‑section. In accordance with JC/T 899‑2016 Concrete Curbstones, it can also be employed to conduct experimental studies on the flexural and compressive strengths of other materials.

WDW Dual-Column Microcomputer-Controlled High- and Low-Temperature Electronic Universal Testing Machine (with Video Extensometer)

The microcomputer-controlled high‑ and low‑temperature electronic universal testing machine consists of the testing machine mainframe, fixtures, a high‑ and low‑temperature chamber, and computer software. The temperature chamber is slid into the mainframe; after opening the chamber door, the specimen is secured in the dedicated fixture. The chamber then heats or cools until the specified temperature is reached.

WDW—Dual-Column Microcomputer-Controlled Electronic Universal Tensile Testing Machine (20 kN)

This machine can perform tests such as tensile, compressive, flexural, tear, 90° peel, 180° peel, shear, adhesion, pull-out force, and elongation at break on rubber, plastics, foamed materials, synthetic resins, films, alloy materials, and other non-metallic and metallic materials.

FAQs

Do you supply full-set testing instruments for asphalt and geotechnical engineering projects?

We offer complete lab solutions including asphalt viscosity tester, asphalt rutting tester, geotextile permeability tester, low-temperature flexibility tester and concrete/cement test equipment, covering raw material detection for road, water conservancy and construction engineering projects

Can you customize fixtures or test machines based on our special test requirements? How about after-sales service and warranty?

We provide non-standard customization of test equipment and customized fixture clamps according to customers’ specimen size and test standards. All our testing machines enjoy 12-month factory warranty; overseas customers get remote online debugging guidance, spare parts supply and technical operation training. Our products have been exported to over 70 countries globally

Which materials can be measured by your Vicat softening point tester?

It measures heat deflection temperature and Vicat softening temperature of plastics, hard rubber, nylon, insulating materials and fiber-reinforced thermosetting composites. Intelligent temperature control guarantees precise heating rate, ideal for plastic raw material incoming inspection and formula development in plastic factories.

Does your pipe pressure burst testing machine control test temperature automatically? What’s its main application?

Yes, the constant-temperature circulating system keeps stable test environment during long-time hydrostatic resistance and instant burst pressure measurement of thermoplastic pipes. It complies with GB6111 standard and serves raw material inspection, new product R&D for plastic pipe manufacturers, third-party testing labs and university laboratories.

What kinds of pipes fit your ring stiffness tester? Can it do long-term creep testing?

This equipment is designed for HDPE, PVC corrugated pipes, plastic drainage pipes and various plastic tubular products. Apart from ring stiffness, ring flexibility and flattening tests, it supports continuous long-term creep tests up to 1000 hours (42 days) as required by industry specifications, widely used for pipe factories and construction quality inspection institutes.

What test items can your WDW series computer-controlled electronic universal testing machine complete? Which international standards can it meet?

Our WDW universal tester is applicable for tension, compression, bending, shearing and peeling tests of metal, plastic, rubber and composite materials. It supports test procedures in accordance with GB, ISO, ASTM, DIN, JIS multiple domestic and global standards. Equipped with high-precision servo drive and dedicated test software, it automatically collects, calculates and exports test data including tensile strength, elongation at break and elastic modulus.

Customer Reviews

Southeast Asia Rubber & Polymer Factory｜Purchase: Vicat Softening Point & Tensile Testing Machine

From Tanaka Hiroshi, R&D Supervisor, Indonesia rubber materials enterprise

2026.06.05

★★★★★

“Laibote’s Vicat softening point tester and electronic tensile machine have been applied to our raw material incoming inspection and new formula development for over one year. High testing accuracy effectively controls our product defect rate. What impresses us most is their responsive after-sale service; technical staff reply our troubleshooting requests within 24 hours even for time zone differences. Compared with expensive European brands, Laibote’s equipment balances quality and price excellently, we plan to expand procurement of auxiliary testing instruments next quarter.”

Middle East Construction Lab｜Purchase: Universal Electronic Testing Machine & Geotextile Test Equipment

From Mohamed Kareem, Lab Manager, UAE third-party construction inspection institute

2026.06.05

★★★★★

“We compared multiple testing equipment brands from Europe and China before cooperating with Laibote. Their WDW universal tester and full-set geotextile testing instruments meet local construction testing standards perfectly. Custom fixtures tailored per our specimen specifications save much testing time. Pre-sale technical communication was patient and professional; engineers provided online operation training after goods arrived. Stable machine performance greatly improves our laboratory’s detection efficiency, we are satisfied with cost performance and overall service.”

European Plastic Pipe Manufacturer｜Purchase: Ring Stiffness & Hydrostatic Burst Tester

From Thomas Bennett, Quality Director, UK plastic pipe factory

2026.06.05

★★★★★

“We have purchased two sets of pipe testing equipment from Laibote (Tianjin) for 18 months. The ring stiffness and hydrostatic burst testing machines run stably for daily batch inspection, test data matches ISO standard requirements precisely, and the intelligent test software is easy for our operators to master. Their after-sales team offers timely remote technical guidance whenever we have operational problems, spare parts supply is efficient. We have arranged a second bulk order for our new production workshop and will recommend Laibote’s testing machines to our industry partners across Europe.”

Consult

We will contact you within one working day. Please pay attention to your email.