LBTH-1 New‑Standard Asphalt Mixture Rutting Specimen Compactor (Touchscreen)
Category:
Keywords:
E-mail:
WhatsApp:
Description
Product Introduction:
The rutting specimen compactor integrates mechanical, electrical, and pneumatic systems, and, compared with similar products, features a compact footprint, a high degree of automation, robust functionality, and user-friendly operation. This machine is primarily used to produce compacted specimens of asphalt mixtures for rutting tests, and it is also suitable for preparing wheel‑roll–type specimens in other physical and mechanical property tests of asphalt mixtures.
This apparatus and the test method comply with the requirements of JTG 3410-2025, “Test Procedures for Asphalt and Asphalt Mixtures in Highway Engineering,” specifically T0703, “Method for Preparing Asphalt Mixture Specimens (Wheel‑Rolling Method).”
Product Features:
Touchscreen LCD display, intelligent temperature control, pneumatic loading, LCD display of loading force, pressure regulator with adjustable pressure, and stable loading pressure.
Structure and Operating Principle:
1. The roller pressure is adjustable within the range of 0 to 20 kN, with an accuracy better than 0.1 kN.
2. The mold height can be selected within the range of 30 to 100 mm.
3. The clamping mechanism for installing the test mold is advanced, easy to use, and safe and reliable.
4. After the mold is mounted on the carriage, it can automatically center itself.
5. The number of roller passes can be set arbitrarily and recorded at any time. Once the actual number of passes reaches the preset value, the roller automatically stops rising and prepares for the next pass.
6. The compaction temperature can be set arbitrarily according to test requirements; once the actual temperature reaches the set value, heating automatically stops, and the temperature is displayed with high accuracy.
Working principle:
The mold test fixture is mounted on a carriage, which performs reciprocating motion driven by a transmission mechanism. The stroke of the carriage is 300 mm. The linkage mechanism consists primarily of a motor, connecting rods, and a rocker arm.
The roller is a sector‑shaped wheel with a radius of 500 mm and a width of 297 mm. It is hinged to the connecting rod of the reduction‑gear assembly; the motion of this rod drives the roller’s vertical movement. The roller contains an internal heating element, and prior to conducting the compaction test, it must be heated to the temperature required for the test. At the start of the compaction test, the roller is pressed against the mixture in the mold, with the applied pressure determined by the air‑pump setting. According to standard test procedures, the normal force exerted by the roller is 9 kN (typically adjustable within the range of 0–20 kN). The number of compaction passes can be set arbitrarily on the counter according to test requirements, and the counter continuously displays the cumulative number of passes. Once the preset number of passes is reached, the compaction test automatically stops, the roller lifts, and the operator can easily remove the mold from the carriage.
The air pump primarily regulates the pressure within the cylinder, with an inner diameter of Ф80 mm. Prior to shipment, the pressure has been set to the level specified in the Ministry of Transport’s test standards; users should not adjust it arbitrarily. If a pressure deviation is detected, refer to the hydraulic station schematic shown in Figure 1 to make the necessary adjustments: loosen the lock nut and turn the adjustment knob to modify the pressure.
Technical Specifications:
| Parameter Category | Parameter content |
| Operating voltage | 380V three-phase four-wire |
| Mold trial specifications | 300×300×300 mm; overall dimensions 400×400×400 mm |
| Die‑testing machine stroke | 300mm |
| Mold trial height variation value | 30~100mm |
| Roller pressure | Adjustable within the range of 0 to 20 kN. |
| Roller radius/width | Radius 500 mm; width 297 mm |
| Tile-rolling preheating temperature | 20–200°C, arbitrarily settable (typically 100°C) |
| Roller line pressure | 300N/cm |
| Overall dimensions of the machine | 1800×1200×620mm |
| Overall machine weight | 300kg |
| Machine power | 550W |
| Heating power | 2000W |
Related Product
WSC-300 Microcomputer-Controlled Steel Strand Stress Relaxation Testing Machine
The WSC-300 microcomputer-controlled steel strand stress relaxation testing machine employs servo control technology and computer-based data acquisition and processing, enabling closed-loop control and automated testing. It comprises four main components: the testing frame, the servo control system, the measurement and control system, and the test fixtures. With a maximum test force of 300 kN, the machine achieves an accuracy class better than 0.5.
YLZ-100 Microcomputer-Controlled Electro-Hydraulic Servo Curbstone Flexural Testing Machine
The YLZ-100 concrete curbstone flexural‑compressive testing machine is used to determine the flexural strength and flexural load of linear curbstones with a length of 1000 mm, as well as the compressive strength of curved curbstones and L‑shaped curbstones with a straight cross‑section. In accordance with JC/T 899‑2016 Concrete Curbstones, it can also be employed to conduct experimental studies on the flexural and compressive strengths of other materials.
The microcomputer-controlled high‑ and low‑temperature electronic universal testing machine consists of the testing machine mainframe, fixtures, a high‑ and low‑temperature chamber, and computer software. The temperature chamber is slid into the mainframe; after opening the chamber door, the specimen is secured in the dedicated fixture. The chamber then heats or cools until the specified temperature is reached.
WDW—Dual-Column Microcomputer-Controlled Electronic Universal Tensile Testing Machine (20 kN)
This machine can perform tests such as tensile, compressive, flexural, tear, 90° peel, 180° peel, shear, adhesion, pull-out force, and elongation at break on rubber, plastics, foamed materials, synthetic resins, films, alloy materials, and other non-metallic and metallic materials.
FAQs
Customer Reviews
Southeast Asia Rubber & Polymer Factory|Purchase: Vicat Softening Point & Tensile Testing Machine
2026.06.05
★★★★★
Middle East Construction Lab|Purchase: Universal Electronic Testing Machine & Geotextile Test Equipment
2026.06.05
★★★★★
European Plastic Pipe Manufacturer|Purchase: Ring Stiffness & Hydrostatic Burst Tester
2026.06.05
★★★★★
Consult
We will contact you within one working day. Please pay attention to your email.
Keywords:
LBTH-1 New‑Standard Asphalt Mixture Rutting Specimen Compactor (Touchscreen)