LBT-1B41 Asphalt Pavement Cold Patch Material Penetration Tester
Category:
Keywords:
E-mail:
WhatsApp:
Description
Product Introduction:
The LBT-1B41 Cold Patch Material Penetration Tester was developed in accordance with the test requirements specified in the Ministry of Transport’s industry standard LT/T 972-2015, “Cold Patch Materials for Asphalt Pavement Potholes.”
Product Structure
1. The LBT-1B41 cold patch penetration tester consists of a test box, a penetration device, and an adapter.
2. Required accompanying equipment: low-temperature test chamber (test temperature 4°C); temperature control accuracy ≤ 1°C.
Technical Specifications:
| Parameter Name | Parameter content |
| Internal side length of the test box | 102mm±0.5mm |
| Test hole diameter | 1.0mm±0.1mm |
| Testing range of the penetration tester | (0-4.5) kg/cm² |
| Adapter | 75 mm long, with a metal tip measuring 9.5 mm in diameter. |
Related Product
WSC-300 Microcomputer-Controlled Steel Strand Stress Relaxation Testing Machine
The WSC-300 microcomputer-controlled steel strand stress relaxation testing machine employs servo control technology and computer-based data acquisition and processing, enabling closed-loop control and automated testing. It comprises four main components: the testing frame, the servo control system, the measurement and control system, and the test fixtures. With a maximum test force of 300 kN, the machine achieves an accuracy class better than 0.5.
YLZ-100 Microcomputer-Controlled Electro-Hydraulic Servo Curbstone Flexural Testing Machine
The YLZ-100 concrete curbstone flexural‑compressive testing machine is used to determine the flexural strength and flexural load of linear curbstones with a length of 1000 mm, as well as the compressive strength of curved curbstones and L‑shaped curbstones with a straight cross‑section. In accordance with JC/T 899‑2016 Concrete Curbstones, it can also be employed to conduct experimental studies on the flexural and compressive strengths of other materials.
The microcomputer-controlled high‑ and low‑temperature electronic universal testing machine consists of the testing machine mainframe, fixtures, a high‑ and low‑temperature chamber, and computer software. The temperature chamber is slid into the mainframe; after opening the chamber door, the specimen is secured in the dedicated fixture. The chamber then heats or cools until the specified temperature is reached.
WDW—Dual-Column Microcomputer-Controlled Electronic Universal Tensile Testing Machine (20 kN)
This machine can perform tests such as tensile, compressive, flexural, tear, 90° peel, 180° peel, shear, adhesion, pull-out force, and elongation at break on rubber, plastics, foamed materials, synthetic resins, films, alloy materials, and other non-metallic and metallic materials.
FAQs
Customer Reviews
Southeast Asia Rubber & Polymer Factory|Purchase: Vicat Softening Point & Tensile Testing Machine
2026.06.05
★★★★★
Middle East Construction Lab|Purchase: Universal Electronic Testing Machine & Geotextile Test Equipment
2026.06.05
★★★★★
European Plastic Pipe Manufacturer|Purchase: Ring Stiffness & Hydrostatic Burst Tester
2026.06.05
★★★★★
Consult
We will contact you within one working day. Please pay attention to your email.
Keywords:
LBT-1B41 Asphalt Pavement Cold Patch Material Penetration Tester