SY-3 Concrete Pressure Bleeding Tester
Category:
Keywords:
E-mail:
WhatsApp:
Description
Product Introduction
The concrete pressure bleeding tester is a specialized instrument used to determine the amount of bleeding water in pumped concrete under a specified pressure, thereby calculating the bleeding rate and the pressure‑bleeding ratio. It is intended for measuring pressure bleeding in concrete mixes with aggregate sizes not exceeding 40 mm. The device offers accurate measurements, simple operation, a compact footprint, lightweight construction, and easy demolding.
The instrument mainly consists of a hydraulic jack, a pressure gauge, an upper‑cover piston, a specimen cylinder, a base, and other components.
Technical Specifications:
| Pressure gauge maximum range: 60 MPa |
| Minimum graduation value: not greater than 0.1 MPa |
| Cylinder bore diameter: 125+0.02 mm |
| Cylinder inner height: 200 ± 0.2 mm |
| Working piston diameter: 125 mm |
| Working piston: pressure 3.2 MPa, diameter 125 mm |
Related Product
WSC-300 Microcomputer-Controlled Steel Strand Stress Relaxation Testing Machine
The WSC-300 microcomputer-controlled steel strand stress relaxation testing machine employs servo control technology and computer-based data acquisition and processing, enabling closed-loop control and automated testing. It comprises four main components: the testing frame, the servo control system, the measurement and control system, and the test fixtures. With a maximum test force of 300 kN, the machine achieves an accuracy class better than 0.5.
YLZ-100 Microcomputer-Controlled Electro-Hydraulic Servo Curbstone Flexural Testing Machine
The YLZ-100 concrete curbstone flexural‑compressive testing machine is used to determine the flexural strength and flexural load of linear curbstones with a length of 1000 mm, as well as the compressive strength of curved curbstones and L‑shaped curbstones with a straight cross‑section. In accordance with JC/T 899‑2016 Concrete Curbstones, it can also be employed to conduct experimental studies on the flexural and compressive strengths of other materials.
The microcomputer-controlled high‑ and low‑temperature electronic universal testing machine consists of the testing machine mainframe, fixtures, a high‑ and low‑temperature chamber, and computer software. The temperature chamber is slid into the mainframe; after opening the chamber door, the specimen is secured in the dedicated fixture. The chamber then heats or cools until the specified temperature is reached.
WDW—Dual-Column Microcomputer-Controlled Electronic Universal Tensile Testing Machine (20 kN)
This machine can perform tests such as tensile, compressive, flexural, tear, 90° peel, 180° peel, shear, adhesion, pull-out force, and elongation at break on rubber, plastics, foamed materials, synthetic resins, films, alloy materials, and other non-metallic and metallic materials.
FAQs
Customer Reviews
Southeast Asia Rubber & Polymer Factory|Purchase: Vicat Softening Point & Tensile Testing Machine
2026.06.05
★★★★★
Middle East Construction Lab|Purchase: Universal Electronic Testing Machine & Geotextile Test Equipment
2026.06.05
★★★★★
European Plastic Pipe Manufacturer|Purchase: Ring Stiffness & Hydrostatic Burst Tester
2026.06.05
★★★★★
Consult
We will contact you within one working day. Please pay attention to your email.
Keywords:
SY-3 Concrete Pressure Bleeding Tester