Home page

LBT-HW-127 UV Weathering Aging Chamber for Safety Nets

Name: LBT-HW-127 UV Weathering Aging Chamber for Safety Nets
Brand: Laibote (Tianjin) Testing Machinery
Availability: InStock

It is primarily used to simulate the major artificial climatic conditions found in outdoor, humid and hot natural atmospheres, enabling testing of the weather resistance of flat (and vertical) safety nets. It is widely employed by specialized labor protective equipment supervision and inspection stations, architectural research institutes, and construction engineering quality‑testing centers.

Category:

Safety Net Testing Instrument

Keywords:

E-mail:

lbt@lbt.ltd

WhatsApp:

+86-15102211717

Consult

LBT-HW-127 UV Weathering Aging Chamber for Safety Nets

Description

Product Introduction

Manufactured in accordance with GB/T 5725 and GB/T 14522, this equipment is primarily used to simulate the major artificial climatic conditions found in outdoor humid‑hot natural environments, enabling testing of the weather resistance of flat (or vertical) mesh fabrics. It is widely employed by specialized labor protective‑equipment supervision and inspection stations, architectural research institutes, and construction engineering quality‑testing centers.

Product Features:

1. The cabinet’s exterior is finished with a high-quality baked enamel coating, while the interior wall material is 304-grade, highly corrosion-resistant mirror-finish stainless steel.

2. The insulation material between the inner and outer boxes is high-quality ultra-fine glass fiber insulation cotton, with an insulation layer thickness of 100 mm.

3. The air duct employs a dual‑circulation system, comprising a long‑shaft axial fan, a stainless‑steel multi‑blade centrifugal impeller, and a recirculating air duct. With upward air discharge and downward air intake, the temperature within the chamber is evenly distributed, enhancing airflow as well as heating and cooling performance, thereby significantly improving the uniformity of temperature and humidity in the test chamber.

4. Humidification, heating, and water supply are independent of one another and do not interfere with each other.

5. The refrigeration system utilizes a fully imported, original French compressor unit and employs the environmentally friendly R404A refrigerant.

6. The control system employs a PLC, a 16-bit true-color touch screen, and dedicated software, allowing users to independently set or select relevant test parameters and procedures.

7. The display screen shows temperature, humidity, light intensity, and the status of condensation or spraying in real time, and can be configured to control these functions automatically.

8. Equipped with multiple safety protection features, including overheat, overvoltage, overload, and leakage protection.

Technical Specifications:

Project	Technical Specifications
Temperature range	Room temperature: -70°C, user‑settable; temperature fluctuation ≤ 1°C.
Blackboard temperature	63℃±3℃
Humidity range	≥95%R.H.
Light source	Imported air-cooled UVA-340 UV lamps, 6 units, each with a power rating of 40 W.
Daylight hours	0–999 hours, user-definable
Condensation time	0–999 hours, user-definable
Test time	0–999 hours, user-definable
Watering cycle	Every 102 minutes, spray for 18 minutes at a water pressure of 0.1–0.15 MPa, with a nozzle diameter of Φ0.8 mm.
Irradiance range	0–2 W/m², adjustable as desired
Instrument dimensions	1000×1200×1850 mm (the working chamber measures 600×500×500 mm)
Instrument power supply	AC 220V ±10%, 50 Hz, 6 kW

Related Product

WSC-300 Microcomputer-Controlled Steel Strand Stress Relaxation Testing Machine

The WSC-300 microcomputer-controlled steel strand stress relaxation testing machine employs servo control technology and computer-based data acquisition and processing, enabling closed-loop control and automated testing. It comprises four main components: the testing frame, the servo control system, the measurement and control system, and the test fixtures. With a maximum test force of 300 kN, the machine achieves an accuracy class better than 0.5.

YLZ-100 Microcomputer-Controlled Electro-Hydraulic Servo Curbstone Flexural Testing Machine

The YLZ-100 concrete curbstone flexural‑compressive testing machine is used to determine the flexural strength and flexural load of linear curbstones with a length of 1000 mm, as well as the compressive strength of curved curbstones and L‑shaped curbstones with a straight cross‑section. In accordance with JC/T 899‑2016 Concrete Curbstones, it can also be employed to conduct experimental studies on the flexural and compressive strengths of other materials.

WDW Dual-Column Microcomputer-Controlled High- and Low-Temperature Electronic Universal Testing Machine (with Video Extensometer)

The microcomputer-controlled high‑ and low‑temperature electronic universal testing machine consists of the testing machine mainframe, fixtures, a high‑ and low‑temperature chamber, and computer software. The temperature chamber is slid into the mainframe; after opening the chamber door, the specimen is secured in the dedicated fixture. The chamber then heats or cools until the specified temperature is reached.

WDW—Dual-Column Microcomputer-Controlled Electronic Universal Tensile Testing Machine (20 kN)

This machine can perform tests such as tensile, compressive, flexural, tear, 90° peel, 180° peel, shear, adhesion, pull-out force, and elongation at break on rubber, plastics, foamed materials, synthetic resins, films, alloy materials, and other non-metallic and metallic materials.

FAQs

Do you supply full-set testing instruments for asphalt and geotechnical engineering projects?

We offer complete lab solutions including asphalt viscosity tester, asphalt rutting tester, geotextile permeability tester, low-temperature flexibility tester and concrete/cement test equipment, covering raw material detection for road, water conservancy and construction engineering projects

Can you customize fixtures or test machines based on our special test requirements? How about after-sales service and warranty?

We provide non-standard customization of test equipment and customized fixture clamps according to customers’ specimen size and test standards. All our testing machines enjoy 12-month factory warranty; overseas customers get remote online debugging guidance, spare parts supply and technical operation training. Our products have been exported to over 70 countries globally

Which materials can be measured by your Vicat softening point tester?

It measures heat deflection temperature and Vicat softening temperature of plastics, hard rubber, nylon, insulating materials and fiber-reinforced thermosetting composites. Intelligent temperature control guarantees precise heating rate, ideal for plastic raw material incoming inspection and formula development in plastic factories.

Does your pipe pressure burst testing machine control test temperature automatically? What’s its main application?

Yes, the constant-temperature circulating system keeps stable test environment during long-time hydrostatic resistance and instant burst pressure measurement of thermoplastic pipes. It complies with GB6111 standard and serves raw material inspection, new product R&D for plastic pipe manufacturers, third-party testing labs and university laboratories.

What kinds of pipes fit your ring stiffness tester? Can it do long-term creep testing?

This equipment is designed for HDPE, PVC corrugated pipes, plastic drainage pipes and various plastic tubular products. Apart from ring stiffness, ring flexibility and flattening tests, it supports continuous long-term creep tests up to 1000 hours (42 days) as required by industry specifications, widely used for pipe factories and construction quality inspection institutes.

What test items can your WDW series computer-controlled electronic universal testing machine complete? Which international standards can it meet?

Our WDW universal tester is applicable for tension, compression, bending, shearing and peeling tests of metal, plastic, rubber and composite materials. It supports test procedures in accordance with GB, ISO, ASTM, DIN, JIS multiple domestic and global standards. Equipped with high-precision servo drive and dedicated test software, it automatically collects, calculates and exports test data including tensile strength, elongation at break and elastic modulus.

Customer Reviews

Consult

We will contact you within one working day. Please pay attention to your email.