Home page

LBT-1000B Microcomputer-Controlled Electro-Hydraulic Servo Rock Triaxial Testing Machine

Name: LBT-1000B Microcomputer-Controlled Electro-Hydraulic Servo Rock Triaxial Testing Machine
Brand: Laibote (Tianjin) Testing Machinery
Availability: InStock

Developed in accordance with national standards and other relevant specifications, it emphasizes practicality, ease of operation, and data accuracy throughout the industry.

Category:

Rock and rock mass testing instrument

Keywords:

E-mail:

lbt@lbt.ltd

WhatsApp:

+86-15102211717

Consult

LBT-1000B Microcomputer-Controlled Electro-Hydraulic Servo Rock Triaxial Testing Machine

Description

Product Introduction

The rock triaxial testing machine complies with the test method standards SL 264-2001 “Test Procedures for Rocks in Hydraulic and Hydroelectric Engineering,” GB/T 50266-2013 “Standard Test Methods for Engineering Rock Masses,” and GB/T 23561.9-2009 “Methods for Determining the Physical and Mechanical Properties of Coal and Rock.” Developed in accordance with national standards and related specifications, it is designed to prioritize practicality, ease of operation, and data accuracy within the industry.

Key features:

The rock triaxial testing apparatus (rock triaxial creep tester) consists primarily of a high-rigidity mainframe, a triaxial pressure chamber, a servo hydraulic power unit, a servo valve, an air compressor unit, a measurement and control system, and a computer system.

1. High-Rigidity Main Frame: The main frame adopts a gantry‑type, high‑rigidity structure. The working hydraulic cylinder is mounted at the center of the lower crossbeam of the frame, with guide rails on both sides to facilitate the installation and removal of the three‑axis pressure chamber.

2. The pressure self‑balancing triaxial pressure cell employs pressure self‑balancing technology. It is fabricated from high‑strength alloy structural steel, and its pressure plates and pressure‑transmitting piston rods are made of bearing steel, subjected to heat treatment and precision machining.

3. Servo Hydraulic Power Unit: The servo hydraulic power unit comprises a servo oil circuit system—consisting of a high-pressure plunger pump assembly, relief valve, precision oil filter, temperature sensor, cooler, and other components—and a confining pressure boosting system, among other subsystems.

4. The measurement and control system of the microcomputer-controlled electro-hydraulic servo rock triaxial testing apparatus comprises an axial force sensor, a confining pressure sensor, an axial strain sensor, a radial strain sensor, displacement sensors, a fully digital controller, and a servo valve, among other components.

Technical specifications:

Parameter item	Specific explanation
Host stiffness	≥10 GN/m
Maximum axial test force	1000 kN; force measurement resolution 20 N; force measurement accuracy ±1%
Maximum confining pressure	60 MPa; confining pressure measurement and control accuracy: ±2%; confining pressure resolution: 0.1 MPa
Deformation measurement and control range	Axial: 0–8 mm; Radial: 0–4 mm; Measurement resolution: 0.0001 mm; Measurement accuracy: ±1%
Displacement measurement and control range	0–100 mm; measurement accuracy ≤ ±0.5% FS; measurement resolution better than one ten-thousandth.
Control waveform	Users can freely define a variety of program waveforms that include loading, hold, and unloading phases (custom programs).
Extreme Control	Automatic protection in case of exceeding limits for axial deformation, radial deformation, time, etc., specimen fracture, oil circuit blockage, or excessively high oil temperature.
Space height / width	Height 850 mm; width 400 mm
Specimen specifications	Φ50×100mm
Host external dimensions	800×1500×2300mm
Oil source footprint dimensions	2500×1100×500mm
Control cabinet footprint dimensions	700×700×2000mm
Weight (approx.)	4500KG

Related Product

WSC-300 Microcomputer-Controlled Steel Strand Stress Relaxation Testing Machine

The WSC-300 microcomputer-controlled steel strand stress relaxation testing machine employs servo control technology and computer-based data acquisition and processing, enabling closed-loop control and automated testing. It comprises four main components: the testing frame, the servo control system, the measurement and control system, and the test fixtures. With a maximum test force of 300 kN, the machine achieves an accuracy class better than 0.5.

YLZ-100 Microcomputer-Controlled Electro-Hydraulic Servo Curbstone Flexural Testing Machine

The YLZ-100 concrete curbstone flexural‑compressive testing machine is used to determine the flexural strength and flexural load of linear curbstones with a length of 1000 mm, as well as the compressive strength of curved curbstones and L‑shaped curbstones with a straight cross‑section. In accordance with JC/T 899‑2016 Concrete Curbstones, it can also be employed to conduct experimental studies on the flexural and compressive strengths of other materials.

WDW Dual-Column Microcomputer-Controlled High- and Low-Temperature Electronic Universal Testing Machine (with Video Extensometer)

The microcomputer-controlled high‑ and low‑temperature electronic universal testing machine consists of the testing machine mainframe, fixtures, a high‑ and low‑temperature chamber, and computer software. The temperature chamber is slid into the mainframe; after opening the chamber door, the specimen is secured in the dedicated fixture. The chamber then heats or cools until the specified temperature is reached.

WDW—Dual-Column Microcomputer-Controlled Electronic Universal Tensile Testing Machine (20 kN)

This machine can perform tests such as tensile, compressive, flexural, tear, 90° peel, 180° peel, shear, adhesion, pull-out force, and elongation at break on rubber, plastics, foamed materials, synthetic resins, films, alloy materials, and other non-metallic and metallic materials.

FAQs

Do you supply full-set testing instruments for asphalt and geotechnical engineering projects?

We offer complete lab solutions including asphalt viscosity tester, asphalt rutting tester, geotextile permeability tester, low-temperature flexibility tester and concrete/cement test equipment, covering raw material detection for road, water conservancy and construction engineering projects

Can you customize fixtures or test machines based on our special test requirements? How about after-sales service and warranty?

We provide non-standard customization of test equipment and customized fixture clamps according to customers’ specimen size and test standards. All our testing machines enjoy 12-month factory warranty; overseas customers get remote online debugging guidance, spare parts supply and technical operation training. Our products have been exported to over 70 countries globally

Which materials can be measured by your Vicat softening point tester?

It measures heat deflection temperature and Vicat softening temperature of plastics, hard rubber, nylon, insulating materials and fiber-reinforced thermosetting composites. Intelligent temperature control guarantees precise heating rate, ideal for plastic raw material incoming inspection and formula development in plastic factories.

Does your pipe pressure burst testing machine control test temperature automatically? What’s its main application?

Yes, the constant-temperature circulating system keeps stable test environment during long-time hydrostatic resistance and instant burst pressure measurement of thermoplastic pipes. It complies with GB6111 standard and serves raw material inspection, new product R&D for plastic pipe manufacturers, third-party testing labs and university laboratories.

What kinds of pipes fit your ring stiffness tester? Can it do long-term creep testing?

This equipment is designed for HDPE, PVC corrugated pipes, plastic drainage pipes and various plastic tubular products. Apart from ring stiffness, ring flexibility and flattening tests, it supports continuous long-term creep tests up to 1000 hours (42 days) as required by industry specifications, widely used for pipe factories and construction quality inspection institutes.

What test items can your WDW series computer-controlled electronic universal testing machine complete? Which international standards can it meet?

Our WDW universal tester is applicable for tension, compression, bending, shearing and peeling tests of metal, plastic, rubber and composite materials. It supports test procedures in accordance with GB, ISO, ASTM, DIN, JIS multiple domestic and global standards. Equipped with high-precision servo drive and dedicated test software, it automatically collects, calculates and exports test data including tensile strength, elongation at break and elastic modulus.

Customer Reviews

Southeast Asia Rubber & Polymer Factory｜Purchase: Vicat Softening Point & Tensile Testing Machine

From Tanaka Hiroshi, R&D Supervisor, Indonesia rubber materials enterprise

2026.06.05

★★★★★

“Laibote’s Vicat softening point tester and electronic tensile machine have been applied to our raw material incoming inspection and new formula development for over one year. High testing accuracy effectively controls our product defect rate. What impresses us most is their responsive after-sale service; technical staff reply our troubleshooting requests within 24 hours even for time zone differences. Compared with expensive European brands, Laibote’s equipment balances quality and price excellently, we plan to expand procurement of auxiliary testing instruments next quarter.”

Middle East Construction Lab｜Purchase: Universal Electronic Testing Machine & Geotextile Test Equipment

From Mohamed Kareem, Lab Manager, UAE third-party construction inspection institute

2026.06.05

★★★★★

“We compared multiple testing equipment brands from Europe and China before cooperating with Laibote. Their WDW universal tester and full-set geotextile testing instruments meet local construction testing standards perfectly. Custom fixtures tailored per our specimen specifications save much testing time. Pre-sale technical communication was patient and professional; engineers provided online operation training after goods arrived. Stable machine performance greatly improves our laboratory’s detection efficiency, we are satisfied with cost performance and overall service.”

European Plastic Pipe Manufacturer｜Purchase: Ring Stiffness & Hydrostatic Burst Tester

From Thomas Bennett, Quality Director, UK plastic pipe factory

2026.06.05

★★★★★

“We have purchased two sets of pipe testing equipment from Laibote (Tianjin) for 18 months. The ring stiffness and hydrostatic burst testing machines run stably for daily batch inspection, test data matches ISO standard requirements precisely, and the intelligent test software is easy for our operators to master. Their after-sales team offers timely remote technical guidance whenever we have operational problems, spare parts supply is efficient. We have arranged a second bulk order for our new production workshop and will recommend Laibote’s testing machines to our industry partners across Europe.”

Consult

We will contact you within one working day. Please pay attention to your email.