Home page

LSY-26 Concrete Specimen Outlet-Type Rapid Freeze-Thaw Testing Machine

The frost resistance of concrete specimens is determined under water–freeze–thaw conditions and expressed in terms of the number of rapid freeze–thaw cycles they can withstand.

Category:

Concrete Testing Equipment

Keywords:

E-mail:

lbt@lbt.ltd

WhatsApp:

+86-15102211717

Consult

LSY-26 Concrete Specimen Outlet-Type Rapid Freeze-Thaw Testing Machine

Description

Product Introduction:

The frost resistance of concrete specimens is determined under water–freeze–thaw conditions and expressed in terms of the number of rapid freeze–thaw cycles they can withstand.

Test procedure:

1. Remove the 100×100×400 concrete freeze–thaw specimens, cured for 24 days, from the curing environment and immerse them in water at 20°C, ensuring that the water level is 20–30 mm above the top surface of the specimens. After the specimens have reached an age of 28 days, proceed with the subsequent tests.

2. Remove the concrete freeze–thaw specimens that meet the requirements from the water and wipe them dry with a damp cloth. Place the specimens whose external dimensions comply with the relevant specifications into the specimen bucket, and then fill the specimen box with clean water to a level 5 mm above the top surface of the specimens.

3. Place the specimen bucket into the freeze–thaw test tank; the instrument automatically cycles the specimens through alternating cooling and heating, periodically subjecting them to freezing and thawing.

4. For each concrete specimen, measure its mass and relative dynamic modulus of elasticity once after every 25 freeze–thaw cycles.

5. After 300 freeze–thaw cycles are completed, the machine automatically shuts down, and the freeze–thaw temperature profile can be downloaded from the device to a computer for staff review and analysis.

Technical Specifications:

Number of specimens	Five groups of 16 specimens
Condenser cooling method	Air-cooled
Specimen dimensions	100×100×400; the temperature-sensing component has the same dimensions.
Freeze-thaw cycle period	2 to 4 hours; the melting time shall be no less than one-quarter of a freeze–thaw cycle.
Freezing Time/Temperature:	1.0–2.5 hours / −18±2℃ (adjustable)
Melting time/temperature:	1.0–2.0 hours / 5±2℃
Temperature sensor control	Touchscreen controller
Sensor 1	Center temperature control: 5 to -18 ± 2°C
Sensor 2	Antifreeze temperature control: -25 to 20°C
Sensor 3	Diagonal temperature control: The temperature variation within the chamber does not exceed 2°C.
Sensor 4	Secondary protection temperature control: 30°C to -25°C
Temperature difference between the specimen center and surface	Less than 28°C
Refrigeration compressor	Imported fully enclosed 5.6 kW
Heating power	7kw
Maximum operating power	7.3kw
Power supply	380V
Studio dimensions (length × width × height)	600×600×600
External dimensions (length × width × height):	1700×900×950
Weight	550kg

Related Product

HC-40 Concrete Multi-functional Strength Tester

The HC-40 concrete multi-functional strength tester is a high-performance testing device integrating multiple advanced technologies, specifically designed for evaluating the strength and quality of concrete.

FAQs

Do you supply full-set testing instruments for asphalt and geotechnical engineering projects?

We offer complete lab solutions including asphalt viscosity tester, asphalt rutting tester, geotextile permeability tester, low-temperature flexibility tester and concrete/cement test equipment, covering raw material detection for road, water conservancy and construction engineering projects

Can you customize fixtures or test machines based on our special test requirements? How about after-sales service and warranty?

We provide non-standard customization of test equipment and customized fixture clamps according to customers’ specimen size and test standards. All our testing machines enjoy 12-month factory warranty; overseas customers get remote online debugging guidance, spare parts supply and technical operation training. Our products have been exported to over 70 countries globally

Which materials can be measured by your Vicat softening point tester?

It measures heat deflection temperature and Vicat softening temperature of plastics, hard rubber, nylon, insulating materials and fiber-reinforced thermosetting composites. Intelligent temperature control guarantees precise heating rate, ideal for plastic raw material incoming inspection and formula development in plastic factories.

Does your pipe pressure burst testing machine control test temperature automatically? What’s its main application?

Yes, the constant-temperature circulating system keeps stable test environment during long-time hydrostatic resistance and instant burst pressure measurement of thermoplastic pipes. It complies with GB6111 standard and serves raw material inspection, new product R&D for plastic pipe manufacturers, third-party testing labs and university laboratories.

What kinds of pipes fit your ring stiffness tester? Can it do long-term creep testing?

This equipment is designed for HDPE, PVC corrugated pipes, plastic drainage pipes and various plastic tubular products. Apart from ring stiffness, ring flexibility and flattening tests, it supports continuous long-term creep tests up to 1000 hours (42 days) as required by industry specifications, widely used for pipe factories and construction quality inspection institutes.

What test items can your WDW series computer-controlled electronic universal testing machine complete? Which international standards can it meet?

Our WDW universal tester is applicable for tension, compression, bending, shearing and peeling tests of metal, plastic, rubber and composite materials. It supports test procedures in accordance with GB, ISO, ASTM, DIN, JIS multiple domestic and global standards. Equipped with high-precision servo drive and dedicated test software, it automatically collects, calculates and exports test data including tensile strength, elongation at break and elastic modulus.

Customer Reviews

European Plastic Pipe Manufacturer｜Purchase: Ring Stiffness & Hydrostatic Burst Tester

From Thomas Bennett, Quality Director, UK plastic pipe factory

2026.06.05

★★★★★

“We have purchased two sets of pipe testing equipment from Laibote (Tianjin) for 18 months. The ring stiffness and hydrostatic burst testing machines run stably for daily batch inspection, test data matches ISO standard requirements precisely, and the intelligent test software is easy for our operators to master. Their after-sales team offers timely remote technical guidance whenever we have operational problems, spare parts supply is efficient. We have arranged a second bulk order for our new production workshop and will recommend Laibote’s testing machines to our industry partners across Europe.”

Middle East Construction Lab｜Purchase: Universal Electronic Testing Machine & Geotextile Test Equipment

From Mohamed Kareem, Lab Manager, UAE third-party construction inspection institute

2026.06.05

★★★★★

“We compared multiple testing equipment brands from Europe and China before cooperating with Laibote. Their WDW universal tester and full-set geotextile testing instruments meet local construction testing standards perfectly. Custom fixtures tailored per our specimen specifications save much testing time. Pre-sale technical communication was patient and professional; engineers provided online operation training after goods arrived. Stable machine performance greatly improves our laboratory’s detection efficiency, we are satisfied with cost performance and overall service.”

Southeast Asia Rubber & Polymer Factory｜Purchase: Vicat Softening Point & Tensile Testing Machine

From Tanaka Hiroshi, R&D Supervisor, Indonesia rubber materials enterprise

2026.06.05

★★★★★

“Laibote’s Vicat softening point tester and electronic tensile machine have been applied to our raw material incoming inspection and new formula development for over one year. High testing accuracy effectively controls our product defect rate. What impresses us most is their responsive after-sale service; technical staff reply our troubleshooting requests within 24 hours even for time zone differences. Compared with expensive European brands, Laibote’s equipment balances quality and price excellently, we plan to expand procurement of auxiliary testing instruments next quarter.”

Consult

We will contact you within one working day. Please pay attention to your email.

Keywords:

LSY-26 Concrete Specimen Outlet-Type Rapid Freeze-Thaw Testing Machine

Whether you want to customize product features

I still need some examples to refer to ——

Please let us know what you're looking for, and we'll send you relevant materials to help you move your project forward quickly!

950 +

Global Partners

99 .9%

Customer Satisfaction

Committed to becoming a leader in China's testing equipment manufacturing industry

Share To

Mobile:+86-15102211717

Whatsapp:+86-15102211717
E-mail:lbt@lbt.ltd

Address:Tianjin Jinghai Economic Development Zone

COOKIES

Our website uses cookies and similar technologies to personalize the advertising shown to you and to help you get the best experience on our website. For more information, see our Privacy & Cookie Policy

COOKIES

required

These cookies are necessary for basic functions such as payment. Standard cookies cannot be turned off and do not store any of your information.

analyze

These cookies collect information, such as how many people are using our site or which pages are popular, to help us improve the customer experience. Turning these cookies off will mean we can't collect information to improve your experience.

Feature

These cookies enable the website to provide enhanced functionality and personalization. They may be set by us or by third-party providers whose services we have added to our pages. If you do not allow these cookies, some or all of these services may not function properly.

advertise

These cookies help us understand what you are interested in so that we can show you relevant advertising on other websites. Turning these cookies off will mean we are unable to show you any personalized advertising.

Business License

SEO