LB-T30 Image-Based Sintering Point Refractoriness High-Temperature Physical Property Tester
Category:
Keywords:
E-mail:
WhatsApp:
Description
Product Introduction:
This instrument is a high‑temperature, transmission‑projection device used to measure the sintering point temperature and refractoriness of molding materials, including raw sand, mixtures, and ceramic raw materials. It enables operators to clearly observe, on the viewing screen, the volume shrinkage, expansion, purification, and complete vitrification of material samples under elevated temperatures, while simultaneously determining the corresponding temperatures at which these phenomena occur. It provides a reliable basis for material selection in production and serves as an essential testing tool for research and educational purposes. The device is widely employed in the foundry, ceramics, and glass industries, as well as in academic and research institutions.
Reference standard:
QB/T 1546 “Method for Determining the Melting Temperature Range of Ceramic Glazes” is required for testing the sintering point temperature of ceramic raw materials.
Equipment composition:
This instrument consists of five main components: a high‑temperature furnace (either a silicon‑carbide rod furnace or a silicon‑molybdenum rod furnace), an imaging system, an electrical control cabinet, a sample preparation unit, and a computer. It employs an industrial camera to directly capture images of the specimen, which are then displayed on a computer monitor via an interface. During camera installation, a protective sleeve is fitted over the lens to minimize the influence of external light sources. At elevated temperatures, the specimen becomes luminescent, allowing for image measurement using the software; users can also select automatic black‑and‑white inversion or choose not to apply this conversion. The camera position can be adjusted forward, backward, left, and right to ensure a clear image. Heating is provided by a tubular resistance furnace equipped with either silicon‑carbide rods or high‑temperature molybdenum filaments as heating elements, with maximum furnace temperatures reaching 1400°C or 1700°C. The heating rate is automatically adjustable, and the temperature gradient within the furnace’s working zone is ±15°C. Imaging section: The specimen is imaged on the display screen, enabling operators to clearly observe the contraction, expansion, passivation, and fully developed global projection images resulting from temperature‑induced changes in the sample inside the furnace.
Technical Specifications:
| Parameter Category | Parameter content |
| Maximum temperature | 1400℃ (optional 1700℃) |
| Heating rate | 0–20°C/min, programmable temperature control |
| Image magnification factor | 8–9 times, with the imaging data paired with a coordinate system enabling straightforward quantification of expansion and contraction. |
| Power supply voltage | 220V±10%, 2kW |
| Maximum specimen size | Φ7×8mm |
| Supporting system | Configuration of a CCD camera and computer image processing system |
| Communications and Software | The instrument is equipped with a standard computer interface, enabling connection to a standard PC. All test procedures are performed via the computer interface, and a complete software package is provided. |
Configuration:
One mechanical unit, one electrical control cabinet, one sample preparation device, three alumina spacers, one camera mounting bracket, one data acquisition card, one set of communication interface and software, a CCD camera, a power supply, one lens assembly, and one video cable. The purchaser shall provide its own computer and printer.
Related Product
WSC-300 Microcomputer-Controlled Steel Strand Stress Relaxation Testing Machine
The WSC-300 microcomputer-controlled steel strand stress relaxation testing machine employs servo control technology and computer-based data acquisition and processing, enabling closed-loop control and automated testing. It comprises four main components: the testing frame, the servo control system, the measurement and control system, and the test fixtures. With a maximum test force of 300 kN, the machine achieves an accuracy class better than 0.5.
YLZ-100 Microcomputer-Controlled Electro-Hydraulic Servo Curbstone Flexural Testing Machine
The YLZ-100 concrete curbstone flexural‑compressive testing machine is used to determine the flexural strength and flexural load of linear curbstones with a length of 1000 mm, as well as the compressive strength of curved curbstones and L‑shaped curbstones with a straight cross‑section. In accordance with JC/T 899‑2016 Concrete Curbstones, it can also be employed to conduct experimental studies on the flexural and compressive strengths of other materials.
The microcomputer-controlled high‑ and low‑temperature electronic universal testing machine consists of the testing machine mainframe, fixtures, a high‑ and low‑temperature chamber, and computer software. The temperature chamber is slid into the mainframe; after opening the chamber door, the specimen is secured in the dedicated fixture. The chamber then heats or cools until the specified temperature is reached.
WDW—Dual-Column Microcomputer-Controlled Electronic Universal Tensile Testing Machine (20 kN)
This machine can perform tests such as tensile, compressive, flexural, tear, 90° peel, 180° peel, shear, adhesion, pull-out force, and elongation at break on rubber, plastics, foamed materials, synthetic resins, films, alloy materials, and other non-metallic and metallic materials.
FAQs
Customer Reviews
Southeast Asia Rubber & Polymer Factory|Purchase: Vicat Softening Point & Tensile Testing Machine
2026.06.05
★★★★★
Middle East Construction Lab|Purchase: Universal Electronic Testing Machine & Geotextile Test Equipment
2026.06.05
★★★★★
European Plastic Pipe Manufacturer|Purchase: Ring Stiffness & Hydrostatic Burst Tester
2026.06.05
★★★★★
Consult
We will contact you within one working day. Please pay attention to your email.
Keywords:
LB-T30 Image-Based Sintering Point Refractoriness High-Temperature Physical Property Tester