Products

JB-300B Metal Pendulum Semi-Automatic Impact Testing Machine (New Standard)

The JB‑300B is a next‑generation pendulum impact testing machine. It is used to evaluate the impact resistance of metallic materials under dynamic loading, thereby assessing their quality and performance under such conditions. This machine features semi‑automatic control, offering simple operation and high efficiency. Its pendulum lifting, impact, and release are all electrically controlled, and it can automatically raise the pendulum using the residual energy after specimen fracture, preparing for the next test. It is particularly well suited for laboratories conducting continuous impact tests, as well as for industries such as metallurgy and mechanical manufacturing that perform large volumes of impact testing.

Keywords:

JB-300B Metal Pendulum Semi-Automatic Impact Testing Machine (New Standard)
+
  • JB-300B Metal Pendulum Semi-Automatic Impact Testing Machine (New Standard)

Description


Product Introduction:

The JB-300B is a next-generation pendulum impact testing machine. It is used to determine the impact resistance of metallic materials under dynamic loading, thereby assessing their quality and performance under such conditions.

This machine is a semi‑automatic testing apparatus that is easy to operate and highly efficient. It features electrical control for pendulum raising, impact, and pendulum release, and can automatically raise the pendulum using the residual energy remaining after the specimen is fractured, thereby preparing for the next test. It is particularly well suited for laboratories conducting continuous impact tests, as well as for industries such as metallurgy and mechanical manufacturing that perform large volumes of impact testing.

Reference standard:

GB/T 3808-2018 “Verification of Pendulum Impact Testing Machines”

GB/T 229-2020 “Metallic Materials — Charpy Pendulum Impact Test Method”

GB/T 18658-2018 “Charpy V-notch Standard Specimens for Verification of Pendulum Impact Testing Machines”

ISO 148 “Charpy Impact Test for Metallic Materials”

ASTM E23, “Standard Test Method for Notched Bar Impact Testing of Metallic Materials”

Product Features:

1. The testing machine features a single-column, cantilever‑type design with a C‑shaped pendulum bob.

2. The impact blade is secured with screws, making replacement simple and convenient.

3. The specimen is supported as a simply supported beam;

4. The host is equipped with a safety pin and a protective guard.

5. The testing machine features semi-automatic control: the pendulum swing, pendulum suspension, impact, and pendulum release are all electrically controlled. Moreover, it can automatically raise the pendulum using the residual energy after the specimen is fractured, thereby preparing for the next test. It is particularly well suited for laboratories conducting continuous impact tests, as well as for metallurgical and mechanical manufacturing departments that perform large volumes of impact testing.

6. The testing machine complies with the national standard GB/T 3808, “Verification of Pendulum Impact Testing Machines,” and performs impact tests on metallic materials in accordance with the national standard GB/T 229, “Metallic Materials — Charpy Pendulum Impact Test Method.”

Technical Specifications:

Parameter Category Parameter content
Impact velocity 5.2m/s
Pendulum pre-raise angle 150°
Specimen support span 40mm
Rounded corners of the bearing jaw R1.0~1.5mm
Impact blade fillet R2.0~2.5mm (R8mm)
Impact angle 30°
Distance from the center of the pendulum to the impact point 750mm
Standard specimen dimensions 10×10 (7.5 or 5)×55mm
Pendulum torque M300=160.7696 N·m, M150=80.3848 N·m
Power Supply and Power Three-phase four-wire, 50 Hz, 380 V, 250 W
External dimensions 2500×750×2000mm
Angular accuracy 0.1°
Total weight of the testing machine Approximately 500K
Impact capacity range and display accuracy
Energy range 0-300J, 0-150J
The scale division value of each small division on the dial 0–300 J: 0.5 J; 0–150 J: 0.25 J
Display resolution 0.01J
Product Description Displays results in accordance with GB/T 229-2020 “Metallic Materials — Charpy Pendulum Impact Test Method.”

Main configuration:

Serial number Name Specification Quantity Note
1 Host 450Kg 1 unit Castings
2 Pendulum Large swing 300J 1 pair Square hammer
Small swing 150J 1 pair Square hammer
3 Span Template L=40 1 item Random
4 Specimen centering block L=40 (V-shaped) 1 item Random
5 Return and sales device Traction Electromagnet Control 1 set Already installed on the host.
6 Hanging and swinging device Valve solenoid control 1 set Already installed on the host.
7 Motor 250W 1 set Already installed on the host.
8 Detection switch 24V 1 set Already installed on the host.
9 Impact blade R2 (National Standard) 2 items Already mounted on the pendulum.
10 Impact blade R8 (US standard) 1 item Optional configuration
11 Dismantling tool For hammer replacement only 1 item Random
12 Anchor bolt S=250 4 sets Random
13 Adjusting wedge Adjust the machine's level. 4 pieces Random
14 Hex key wrench S=12 1 piece Random
15 Jaw (including jaw base) R1*00.5 1 pair Already installed on the host.
16 Protective Net Semi-enclosed 1 set Random
17 Hand Control Box In-house production 1 pair Random
18 Instruction Manual In-house production Combined into 1 portion Random
19 Certificate of Conformity In-house production
20 Packing List In-house production

Related Product


WSC-300 Microcomputer-Controlled Steel Strand Stress Relaxation Testing Machine

The WSC-300 microcomputer-controlled steel strand stress relaxation testing machine employs servo control technology and computer-based data acquisition and processing, enabling closed-loop control and automated testing. It comprises four main components: the testing frame, the servo control system, the measurement and control system, and the test fixtures. With a maximum test force of 300 kN, the machine achieves an accuracy class better than 0.5.

YLZ-100 Microcomputer-Controlled Electro-Hydraulic Servo Curbstone Flexural Testing Machine

The YLZ-100 concrete curbstone flexural‑compressive testing machine is used to determine the flexural strength and flexural load of linear curbstones with a length of 1000 mm, as well as the compressive strength of curved curbstones and L‑shaped curbstones with a straight cross‑section. In accordance with JC/T 899‑2016 Concrete Curbstones, it can also be employed to conduct experimental studies on the flexural and compressive strengths of other materials.

WDW Dual-Column Microcomputer-Controlled High- and Low-Temperature Electronic Universal Testing Machine (with Video Extensometer)

The microcomputer-controlled high‑ and low‑temperature electronic universal testing machine consists of the testing machine mainframe, fixtures, a high‑ and low‑temperature chamber, and computer software. The temperature chamber is slid into the mainframe; after opening the chamber door, the specimen is secured in the dedicated fixture. The chamber then heats or cools until the specified temperature is reached.

WDW—Dual-Column Microcomputer-Controlled Electronic Universal Tensile Testing Machine (20 kN)

This machine can perform tests such as tensile, compressive, flexural, tear, 90° peel, 180° peel, shear, adhesion, pull-out force, and elongation at break on rubber, plastics, foamed materials, synthetic resins, films, alloy materials, and other non-metallic and metallic materials.

FAQs



A
We offer complete lab solutions including asphalt viscosity tester, asphalt rutting tester, geotextile permeability tester, low-temperature flexibility tester and concrete/cement test equipment, covering raw material detection for road, water conservancy and construction engineering projects

A
We provide non-standard customization of test equipment and customized fixture clamps according to customers’ specimen size and test standards. All our testing machines enjoy 12-month factory warranty; overseas customers get remote online debugging guidance, spare parts supply and technical operation training. Our products have been exported to over 70 countries globally

A
It measures heat deflection temperature and Vicat softening temperature of plastics, hard rubber, nylon, insulating materials and fiber-reinforced thermosetting composites. Intelligent temperature control guarantees precise heating rate, ideal for plastic raw material incoming inspection and formula development in plastic factories.

A
Yes, the constant-temperature circulating system keeps stable test environment during long-time hydrostatic resistance and instant burst pressure measurement of thermoplastic pipes. It complies with GB6111 standard and serves raw material inspection, new product R&D for plastic pipe manufacturers, third-party testing labs and university laboratories.

A
This equipment is designed for HDPE, PVC corrugated pipes, plastic drainage pipes and various plastic tubular products. Apart from ring stiffness, ring flexibility and flattening tests, it supports continuous long-term creep tests up to 1000 hours (42 days) as required by industry specifications, widely used for pipe factories and construction quality inspection institutes.

A
Our WDW universal tester is applicable for tension, compression, bending, shearing and peeling tests of metal, plastic, rubber and composite materials. It supports test procedures in accordance with GB, ISO, ASTM, DIN, JIS multiple domestic and global standards. Equipped with high-precision servo drive and dedicated test software, it automatically collects, calculates and exports test data including tensile strength, elongation at break and elastic modulus.

Customer Reviews


Southeast Asia Rubber & Polymer Factory|Purchase: Vicat Softening Point & Tensile Testing Machine

Southeast Asia Rubber & Polymer Factory|Purchase: Vicat Softening Point & Tensile Testing Machine

From Tanaka Hiroshi, R&D Supervisor, Indonesia rubber materials enterprise

2026.06.05

★★★★★

“Laibote’s Vicat softening point tester and electronic tensile machine have been applied to our raw material incoming inspection and new formula development for over one year. High testing accuracy effectively controls our product defect rate. What impresses us most is their responsive after-sale service; technical staff reply our troubleshooting requests within 24 hours even for time zone differences. Compared with expensive European brands, Laibote’s equipment balances quality and price excellently, we plan to expand procurement of auxiliary testing instruments next quarter.”
Middle East Construction Lab|Purchase: Universal Electronic Testing Machine & Geotextile Test Equipment

Middle East Construction Lab|Purchase: Universal Electronic Testing Machine & Geotextile Test Equipment

From Mohamed Kareem, Lab Manager, UAE third-party construction inspection institute

2026.06.05

★★★★★

“We compared multiple testing equipment brands from Europe and China before cooperating with Laibote. Their WDW universal tester and full-set geotextile testing instruments meet local construction testing standards perfectly. Custom fixtures tailored per our specimen specifications save much testing time. Pre-sale technical communication was patient and professional; engineers provided online operation training after goods arrived. Stable machine performance greatly improves our laboratory’s detection efficiency, we are satisfied with cost performance and overall service.”
European Plastic Pipe Manufacturer|Purchase: Ring Stiffness & Hydrostatic Burst Tester

European Plastic Pipe Manufacturer|Purchase: Ring Stiffness & Hydrostatic Burst Tester

From Thomas Bennett, Quality Director, UK plastic pipe factory

2026.06.05

★★★★★

“We have purchased two sets of pipe testing equipment from Laibote (Tianjin) for 18 months. The ring stiffness and hydrostatic burst testing machines run stably for daily batch inspection, test data matches ISO standard requirements precisely, and the intelligent test software is easy for our operators to master. Their after-sales team offers timely remote technical guidance whenever we have operational problems, spare parts supply is efficient. We have arranged a second bulk order for our new production workshop and will recommend Laibote’s testing machines to our industry partners across Europe.”

Consult


We will contact you within one working day. Please pay attention to your email.

Submit
%{tishi_zhanwei}%

Keywords:

JB-300B Metal Pendulum Semi-Automatic Impact Testing Machine (New Standard)